Loading...
Three 8-1/2" x 11" copies of a plot plan depicting all areas undergoing abatement, drawn to scale, shall be provided by the contractor at the time of permit application.
The following shall be included in the drawing:
1. Each drawing must show the entire floor area, with north indicated at the top, and clearly indicate the area(s) undergoing abatement by outlining in red.
2. All entrances and exits for each containment area must be shown. Any exit which is blocked by the containment shall have the word “BLOCKED” printed next to it.
3. Location of each negative air machine shall be indicated.
4. Location of the negative air machine emergency shut-off switch shall be shown.
5. Location of emergency Fire Department protective entry clothing shall be shown.
Before accepting an application for any permit required by Section 57.324, the Department will collect the fees established by the most current cost-recovery schedule published, as provided by Section 57.106.6.3 and applicable thereto. Fees established by the procedure set forth in Section 57.106.6.3 shall apply to permits for all occupancies at a flat rate of $300, plus nine cents per square foot of ACM abated over 1,000 square feet.
Notification and maintenance of information shall be in accordance with Sections 57.324.5.1 through 57.324.5.3.1.1.
Loading...