(a) All construction of new buildings and all major alterations, which are subject to the provisions of Sections 1110, 1111 through 1111.6, and 1113, shall be compatible with the District in general with respect to the building’s composition and massing, scale, materials and colors, and detailing and ornamentation, including those features described in Section 6 of this Appendix. Emphasis shall be placed on compatibility with those buildings in the area in which the new or altered building is located. In the case of major alterations, only those building characteristics that are affected by the proposed alteration shall be considered in assessing compatibility. Signs on buildings in conservation districts are subject to the provisions of Section 1111.7.
The foregoing standards do not require, or even encourage, new buildings to imitate the styles of the past. Rather, they require the new to be compatible with the old. The determination of compatibility shall be made in accordance with the provisions of Section 309.
(b) The guidelines in this Subsection are to be used in assessing compatibility.
(1) Composition and Massing. New construction should maintain the district’s essential character by relating to the prevailing height, mass, proportions, rhythm and composition of existing Significant and Contributory Buildings. The height and massing of new buildings should not alter the traditional scale of existing buildings, streets and open spaces. In addition to the consideration of sunlight access for the street, an appropriate streetwall height is established by reference to the prevailing height of the buildings on the block and especially that of adjacent buildings. If the adjacent buildings are of a significantly different height than the rest of the buildings on the block, then the prevailing height of buildings on the block should be used as a guide. A setback at the streetwall height can permit additional height above the setback without breaking the continuity of the street wall.
Most existing buildings are built to the property or street line. This pattern, except in the case of carefully selected open spaces, should not be broken since it could damage the continuity of building rhythms and the definitions of streets.
The standard proportions of new buildings should be established by the prevailing streetwall height and width of lots. To ensure that an established set of proportions is maintained, it is necessary to break up the facades of new buildings into smaller sections that relate to those existing proportions.
The design of a new structure should repeat the common pattern of two and three part vertical compositions. A base element is necessary to define the pedestrian environment. This division of a building allows flexibility in the design of the ground story while encouraging uniformity of the upper stories.
(2) Scale. A major influence on scale is the degree to which the total facade plane is broken into smaller parts (e.g., by detailing, fenestration, and bay widths) which relate to human scale. The existing scale of small- to medium-sized buildings found in the District should be maintained. This can be accomplished in a variety of ways, including a consistent use of size and complexity of detailing in regards to surrounding buildings, continuance of existing bay widths, maintenance of an existing streetwall height, and incorporation of a base element (of similar height) to maintain the pedestrian environment. Large wall surfaces, which increase a building’s scale, should be broken up through the use of detailing and textural variation.
Existing fenestration (windows and entrances) rhythms and proportions which have been established by lot width or bay width should be repeated in new structures. The spacing and size of window openings should follow the sequence set by Significant and Contributory structures. Large glass areas should be broken up by mullions so that the scale of glazed areas is compatible with that of neighboring buildings. Casement and double-hung windows should be used where possible.
(3) Materials and Colors. The use of like materials can relate two buildings of obviously different eras and styles. Similarly, the use of materials that appear similar (such as substituting concrete for stone) can link two disparate structures, or harmonize the appearance of a new structure with the architectural character of a conservation district. The preferred surface materials for this District are brick, stone, and concrete simulated to look like terra cotta or stone.
The texture of surfaces can be treated in a manner so as to emphasize the bearing function of the material, as is done in rustication on historic buildings.
Traditional light colors and earth tones should be used in order to blend in with the character of the district. Dissimilar buildings may be made more compatible by using similar or harmonious colors, and to a lesser extent, by using similar textures.
(4) Detailing and Ornamentation. A new building should relate to the surrounding area by picking up elements from surrounding buildings and repeating them or developing them for new purposes. Detailing of a similar shape and placement can be used without directly copying historical ornament. The new structure should incorporate prevailing cornice lines or belt courses and may also use a modern vernacular instead of that of the original model.
(Added by Ord. 257-18, File No. 180724, App. 11/2/2018, Eff. 12/3/2018)