NO. AB-088 : | |
DATE : | March 25, 2008 (Updated 01/01/2023 for code references) |
SUBJECT : | Resource Conservation |
TITLE : | Collection and Storage of Recyclable, Compostable and Trash Materials |
PURPOSE : | The purpose of this Administrative Bulletin is to provide standards and procedures for local implementation of the California Solid Waste Reuse and Recycling Access Act of 1991, and the related adopted Model Ordinance, which require that local jurisdictions enforce regulations to assure that adequate areas for collecting and loading for recyclable materials are provided in development projects. Under these regulations, cities are mandated to enforce requirements for certain new development projects and building alterations as detailed below. |
REFERENCES : | California Public Resources Code, Division 30, Part 3, Chapter 18, California Solid Waste Reuse and Recycling Access Act of 1991. California Integrated Waste Management Board, Model Ordinance Relating to Areas for Collecting and Loading Recyclable Materials in Development Projects, Resolution No. 93-57. Current edition of California Green Building Standards Code, sections 4.410.2 and 5.410.1. Current edition of the San Francisco Building Code, Section 106A.3.3, Information to be provided on plans to determine compliance with codes and regulations. San Francisco Environment Code Chapter 19 (Mandatory Recycling and Composting; Refuse Separation Ordinance); San Francisco Refuse Collection Space Design Guide; San Francisco Environment Code Section 902(b)(1). |
DISCUSSION : |
The City and County of San Francisco enforces state and local codes regarding Solid Waste Reuse and Recycling. These codes will help meet locally zero waste commitments of reducing total generation of solid waste in 2030 by at least 15% below 2015 levels, and reduction in solid waste disposal of at least 50% below 2015 levels.
For the purpose of enforcement of these regulations in San Francisco, recycled materials are those which are diverted or recovered from the solid-waste stream. The word trash refers to materials that are non-recyclable and non-compostable.
This Administrative Bulletin details procedures for local enforcement of the requirements of state and local policies. These include the Model Ordinance adopted by the California Integrated Waste Management Board, Resolution 93-57 regarding Areas for Collecting and Loading Recyclable Materials in Development Projects. State law prohibited the issuance of permits for certain development projects after July 1, 2005 unless adequate space is provided for collection, storage, and conveyance of such materials. In addition, San Francisco Environment Code Chapter 19, Mandatory Recycling and Composting:
• Requires all persons in San Francisco to separate and deposit all recyclables, compostables or trash in appropriate containers designated for each type of refuse;
• Requires owners or managers of multifamily or commercial properties to provide adequate refuse collection service to tenants, employees, contractors, and customers of these properties; and
• Requires containers of appropriate number and size for the recyclable, compostable, and trash quantities reasonably anticipated to be generated at the location, with collection containers placed as close together as possible in order to provide all occupants with convenient access to containers designated for each type of refuse.
Well-designed refuse collection areas support successful participation in San Francisco’s mandatory recycling and composting programs that will apply when the building is completed.
General Requirements:
Applicability
As detailed in the Model Ordinance and California Green Building Standards Code The following projects or portions of projects are required to provide adequate areas for collecting and loading recyclable materials, compostable organics, and trash:
• Newly constructed non-residential buildings (CalGreen 5.410.1);
• Newly constructed residential buildings with 5 or more dwelling units (CalGreen 4.410.2);
• Any new public facility where solid waste is collected and loaded, and any improvements for areas of a public facility used for collecting and loading solid waste;
• A new subdivision or tract of single-family detached homes if solid waste is collected and loaded in a location that services five or more living units;
• Any one of the above types of projects that is existing to which an addition is made that adds 30 percent or more to the existing floor area of the project;
• Any one of the above types of projects that is existing to which multiple additions are made over a one-year period that cumulatively add 30 percent or more to the existing floor area of the project;
• Any one of the above types of projects, occupied by multiple tenants, to which one or more tenant improvements are made under building permit over a one-year period by any one tenant that adds 30 percent or more to that tenant’s leased area, in which case that tenant’s leased area shall be provided with sufficient recycling areas;
Solid-waste collection methods and storage
In accordance with the City and County of San Francisco’s zero waste goal and targets and to facilitate compliance with mandatory recycling and composting requirements that will apply to the building when it is completed, the amount of space provided for the collection and storage of recyclable and compostable materials shall be sufficient to allow recovery of 100 percent of the facility’s recyclable and compostable materials and any remaining trash. Space shall be sufficient to accommodate containers consistent with both current methods and percentages of solid-waste storage and removal, and with projected needs when San Francisco’s zero waste goal is met.
All areas designated for the collection and loading of recyclable, compostable and trash materials shall be integrated into the design and, when appropriate, the structure of the project. Areas for recyclable and compostable materials shall be at least as convenient and usable as spaces provided for non-recyclable and non-compostable trash disposal, and shall be located in the same areas whenever possible. When separate locations must be provided due to space constraints, the locations for collection of recyclable and compostable materials shall be at least as convenient as trash disposal locations.
Each dwelling unit in a covered project shall include areas within the dwelling unit designed and designated for storage of recyclable, compostable and trash materials.
Any chute system for solid-waste disposal in a covered project must be designed for equal convenience to all users to separate the three refuse streams of trash, recycling and compostable materials.
Guidance on Recycling Design
Guidance in providing adequate areas for collecting and loading of recyclable, compostable and trash materials is available:
• The Department of the Environment (415-355-3700) has published the San Francisco Refuse Collection Space Design Guide and an Adequate Refuse Collection Space Calculator to estimate the floor area necessary to provide adequate space collecting and loading of recycling, composting, and trash service in San Francisco.. See https://sfenvironment.org/refusecalculator. For additional assistance:
• The City’s permitted refuse haulers will provide assistance in determining appropriate collection, storage and loading locations, dimensions and other requirements (for contact information please call the Department of the Environment at 415-355-3700);
• The California Integrated Waste Management Board, Planning and Assistance Division can provide a “Recycling Space Allocation Guide” and other assistance (916-322-4027). This publication is available at https://www2.calrecycle.ca.gov/Publications/Details/832.
• US Green Building Council provides recycling area guidelines in various publications. Information is available on the USGBC website at www.usgbc.org/resources.
Procedures:
Submittals
For each covered project, the submittal documents accompanying the permit application shall provide sufficient detail to assure compliance with these requirements, including the following specific information:
1. Size and location of storage, collection and loading areas for all recyclable, compostable and trash materials, including space within individual dwelling units.
2. Type, size and number of collection containers for all recyclable, compostable and trash materials.
3. Type of proposed material handling equipment (e.g. compactors, balers, tippers, turntable systems, etc.)
4. Collection routes to conveniently access all recyclable, compostable and trash loading areas, including sufficient vertical and horizontal maneuvering clearances for collection vehicles.
5. Type and number of chutes proposed for recyclable, compostable and trash materials.
6. Signage for proposed collection, storage, and loading areas and containers.
7. Path-of-travel and other access for persons with disabilities to collection facilities, when required.
8. If not all in one location in the submittal documents, an index of locations in the submittal documents of the above required information.
Review
Submittal documents will be reviewed by Department of Building Inspection staff, who may consult with staff of other agencies such as Department of the Environment.
When approved as part of a building permit, requirements for adequate areas for collecting and loading of recyclable, compostable and trash materials become part of the required building construction.
Maintenance of facilities
Maintenance of facilities designed for collection, storage and loading of recyclable, compostable and trash materials is required under San Francisco Existing Building Code 101.4.4.
Originally Signed by:
Isam Hasenin, P.E., C.B.O., Director
Department of Building Inspection
Approved by the Building Inspection Commission on March 19, 2008
Attachment A: Model Ordinance of the California Integrated Waste Management Board Relating to Areas for Collecting and Loading Recyclable Materials in Development Projects