18-29-605.14.1 Reserved.

Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.1, which pertained to brazed joints.

18-29-605.14.2 Reserved.

Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.2, which pertained to mechanical joints.

18-29-605.14.3 Reserved.

Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.3, which pertained to soldered joints.

18-29-605.14.4 Threaded joints.

   Threads shall conform to ASME B1.20.1. Pipe-joint compound or tape shall be applied on the male threads only.

Added Coun. J. 10-14-21, p. 37722, Art. VI, § 18)

18-29-605.14.5 Welded joints.

   Joint surfaces shall be cleaned. The joint shall be welded with an approved filler metal.

(Added Coun. J. 10-14-21, p. 37722, Art. VI, § 18)

18-29-605.15 Copper tubing.

   Joints between copper or copper-alloy tubing or fittings shall comply with Sections 18-29-605.15.1 through 18-29-605.15.7.

(Amend Coun. J. 10-14-21, p. 37722, Art. VI, § 19)

18-29-605.15.1 Brazed joints.

   All joint surfaces shall be cleaned. An approved flux shall be applied where required. The joint shall be brazed with a filler metal conforming to AWS A5.8.

18-29-605.15.2 Flared joints.

   Flared joints for water pipe shall be made by a tool designed for that operation.

18-29-605.15.3 Grooved and shouldered mechanical joints.

   Grooved and shouldered mechanical joints shall comply with ASTM F1476, shall be made with an approved elastomeric seal and shall be installed in accordance with the manufacturer's instructions. Such joints may be exposed or concealed.

(Added Coun. J. 10-14-21, p. 37722, Art. VI, § 19)