Loading...
18-29-605.12.3 Threaded joints.
   Threads shall conform to ASME B1.20.1. Pipe- joint compound or tape shall be applied on the male threads only.
18-29-605.12.4 Welded joints.
   All joint surfaces shall be cleaned. The joint shall be welded with an approved filler metal.
18-29-605.13 Gray iron and ductile iron joints.
   Joints for gray and ductile iron pipe and fittings shall comply with AWWA C111 and shall be installed in accordance with the manufacturer's installation instructions.
18-29-605.14 Reserved.
Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, as corrected by Coun. J. 4-19-23, p. 62477, § 1, repealed § 18-29-605.14, which pertained to copper pipe.
18-29-605.14.1 Reserved.
Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.1, which pertained to brazed joints.
18-29-605.14.2 Reserved.
Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.2, which pertained to mechanical joints.
18-29-605.14.3 Reserved.
Editor's note – Coun. J. 12-14-22, p. 58278, Art. VI, § 10, repealed § 18-29-605.14.3, which pertained to soldered joints.
18-29-605.14.4 Threaded joints.
   Threads shall conform to ASME B1.20.1. Pipe-joint compound or tape shall be applied on the male threads only.
Added Coun. J. 10-14-21, p. 37722, Art. VI, § 18)
Loading...