Sec. 25-33. Conditions for obtaining permit.

The conditions set forth in section 25-20 may be required before issuance of a permit.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-34. Variance from standards.

Variance from standards may be authorized pursuant to the provisions of section 26-7.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-35. Permit expiration.

A permit shall expire for work not started within thirty (30) days or completed within sixty (60) days after issuance of a permit, and a new permit shall be required before beginning or completing the work.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-36. Conformance to rules and regulations.

All work shall conform to specifications and to the rules and regulations established by the director of public works and to instruction issued pursuant thereto by the street and sidewalk inspector.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-37. Inspection of work.

   (a)   All work shall be subject to inspection by the city during construction and upon completion thereof.

   (b)   The street and sidewalk inspector shall be notified by permittee before concrete is poured and/or surfacing is applied, and the permittee shall not proceed further with the work until being authorized by the street and sidewalk inspector.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-38. Special requirements in residential districts.

   (a)   Curb cuts and driveways shall conform to the following requirements in all residential zoned districts:

   Minimum curb cut width . . . . . 10 feet

   Maximum curb cut width . . . . . 20 feet

   Maximum curb cut width for 2 adjoining properties . . . . . 30 feet

   Minimum distance between curb cuts . . . . . 12 feet

   Minimum distance of curb cut from street light standards, or catch basins . . . . . 5 feet

   Minimum distance of curb cut from a fire hydrant of city water hydrant . . . . . 20 feet

   Minimum distance of curb cut from end of a curb return . . . . . 4 feet

   OR

   from a curb line or a cross street at a street intersection, whichever is more restrictive . . . . . 20 feet

See Tucson Code Chapter 23, Land Use Code, particularly Section 3.2.14 and Development Standards, Section 3, Transportation, for additional requirements and standards.

   (b)   Any nonresidential use which would generate more than five (5) times the amount of traffic that would be generated as a result of (a) the existing use of the property if developed for residential use, or (b) the predominant use on the residential block if the property is vacant, shall not have access to an interior residential neighborhood street after June 1, 1998.

   (1)   "Interior residential neighborhood street" as used in this subsection shall include any block consisting entirely of residentially zoned properties except for streets which have been designated as arterial or collector streets in the major streets and routes plan.

   (2)   A waiver to this requirement may be granted at the discretion of the director of the department of transportation where justified by a traffic mitigation plan or unique circumstances which substantially achieve the level of traffic on the affected area as required by this subsection. No waiver may be granted without providing notice and an opportunity for comment to the residential property owners on the block for which the waiver is proposed. Any decision of the director of the department of transportation may be appealed to the mayor and council by the applicant or an affected property owner.

(Ord. No. 2657, § 1, 10-19-64; Ord. No. 9065, § 1, 6-1-98; Ord. No. 9065, § 1, 6-1-98)

Sec. 25-39. Special requirements in business districts.

Curb cuts and driveways shall conform to the following requirements in all business zoned districts:

   Maximum curb cut width . . . . . 35 feet

   Maximum driveway width at the property line . . . . . 30 feet

   Minimum distance between curb cuts or driveways . . . . . 20 feet

   Maximum number of curb cuts or driveways per 100 feet of street frontage . . . . . 2

   Minimum distance of curb cuts from street light standards, or catch basins . . . . . 5 feet

   Minimum distance from a fire hydrant of city water hydrant . . . . . 20 feet

   Minimum distance from end of a curb return . . . . . 4 feet

   OR

   From a curb line on a cross street at a street intersection . . . . . 20 feet

whichever is more restrictive.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-40. Special requirements in industrial districts.

   (a)   Curb cuts and driveways shall conform to the following requirements in all industrial zoned districts:

The provisions established for curb cuts and driveways in section 25-39 for business zoned districts shall prevail in all industrial zoned districts for properties fronting on a through street, as defined in this Code, or on a major street as shown on the latest major streets and routes plan on file with the city engineer.

   (b)   If the property does not front on a through or major street, only the following provisions shall prevail:

   Minimum distance of curb cut from street light standards or catch basins . . . . . 5 feet

   Minimum distance from a fire hydrant or city water hydrant . . . . . 20 feet

   Minimum distance from end of a curb return . . . . . 4 feet

   OR

   from the curbline on a cross street at a street intersection . . . . . 23 feet

whichever is the more restrictive.

(Ord. No. 2657, § 1, 10-19-64)

Sec. 25-41. Variances from curb cuts and driveway requirements.

The director of public works may grant written variances from the minimum and maximum requirements set forth for the location of curb cuts and driveways in section 25-38 through 25-40 upon written approval by the traffic engineer, provided:

   (1)   The area has peculiar, visible conditions not ordinarily existing in similar areas; or

   (2)   The nature of the business on the property is exceptional; or

   (3)   The nature of the abutting property is exceptional; and

   (4)   The variance is not against the public interest, safety, convenience or general welfare.

(Ord. No. 2657, § 1, 10-19-64)