18-29-705.14.1 Heat-fusion joints.

   Joint surfaces shall be clean and free from moisture. Joint surfaces shall be cut, heated to melting temperature and joined using tools specifically designed for the operation. Joints shall be undisturbed until cool. Joints shall be made in accordance with ASTM D2657 and the manufacturer's instructions.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.14.2 Mechanical joints.

   Mechanical joints in drainage piping shall be made with an elastomeric seal conforming to ASTM C1173, ASTM D3212 or CSA B602. Mechanical joints shall be installed in accordance with the manufacturer's instructions.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.15 Polyolefin plastic.

   Joints between polyolefin plastic pipe and fittings shall comply with Sections 18-29-705.15.1 and 18-29-705.15.2.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.15.1 Heat-fusion joints.

   Heat-fusion joints for polyolefin pipe and tubing joints shall be installed with socket-type heat-fused polyolefin fittings or electrofusion polyolefin fittings. Joint surfaces shall be clean and free from moisture. The joint shall be undisturbed until cool. Joints shall be made in accordance with ASTM F1412 or CSA B181.3.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.15.2 Mechanical and compression sleeve joints.

   Mechanical and compression sleeve joints shall be installed in accordance with the manufacturer's instructions.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.16 Polyvinylidene fluoride plastic.

   Joints between polyvinylidene fluoride plastic pipe and fittings shall comply with Sections 18-29-705.16.1 and 18-29-705.16.2.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.16.1 Heat-fusion joints.

   Heat-fusion joints for polyvinylidene fluoride pipe and tubing joints shall be installed with socket-type heat-fused polyvinylidene fluoride fittings or electrofusion polyvinylidene fittings and couplings. Joint surfaces shall be clean and free from moisture. The joint shall be undisturbed until cool. Joints shall be made in accordance with ASTM F1673.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.16.2 Mechanical and compression sleeve joints.

   Mechanical and compression sleeve joints shall be installed in accordance with the manufacturer's instructions.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)

18-29-705.17 Reserved.

(Added Coun. J. 10-14-21, p. 37722, Art. VII, § 5)