Loading...
Joints between copper or copper-alloy pipe or tubing and galvanized steel pipe shall be made with a copper-alloy fitting or dielectric fitting. The copper tubing shall be soldered to the fitting in an approved manner, and the fitting shall be screwed to the threaded pipe.
(Amend Coun. J. 10-14-21, p. 37722, Art. VII, § 5)
Joints between different types of plastic pipe shall be made with an approved adapter fitting. Joints between plastic pipe and other piping material shall be made with an approved adapter fitting. Joints between plastic pipe and cast-iron hub pipe shall be made by a caulked joint or a mechanical compression joint.
(Amend Coun. J. 10-14-21, p. 37722, Art. VII, § 5)
Slip joints shall be made with an approved elastomeric gasket and shall only be installed on the trap outlet, trap inlet and within the trap seal. Slip joints installed in concealed locations shall conform to Section 18-29-405.8.
(Amend Coun. J. 10-14-21, p. 37722, Art. VII, § 5)
Loading...