The following site development regulations shall apply in LI Light Industrial Park Districts:
(a) Site Area. The minimum site area shall be two acres.
(b) Lot Width. The minimum site width shall be 200 feet at the front yard setback line.
(c) Building Setback from Street Right-of-Way. The minimum setback for lots that abut arterial streets is 40 feet. The minimum setback for lots that abut industrial roads is 40 feet.
(d) Building Setback from Side Lot Lines. The minimum setback for lots that adjoin residential districts is 25 feet. The minimum setback for lots that are within or adjoin nonresidential districts is 10 feet.
(e) Building Setback from Rear Lot Line. The minimum setback for lots that adjoin residential districts is 25 feet. The minimum setback for lots that are within or adjoin nonresidential districts is 25feet.
(f) Maximum Coverage by Buildings. The maximum site coverage by all buildings shall be 30%.
(g) Height. The maximum height for all buildings in the LI Light Industrial Park District shall not exceed 35 feet or two floors when adjoining residential districts or 40 feet when adjoining nonresidential districts. Mechanical space for building equipment placed on the building roof may be allowed above the maximum height specified, provided such mechanical equipment is set back a minimum of 15 feet front any exterior wall, does not exceed 15 feet in height and is adequately screened from view, and provided such mechanical equipment and screening are approved by the Planning and Zoning Commission.
(Ord. 2393, passed 1-23-02)