18-29-303.4.2 Reserved.

Materials used shall be installed in strict accordance with the standards under which the materials are accepted and approved. In the absence of such installation procedures, the manufacturer's instructions shall be followed. Where the requirements of referenced standards or manufacturer's instructions do not conform to minimum provisions of this chapter, the provisions of this chapter shall apply.

(Amend Coun. J. 10-14-21, p. 37722, Art. III, § 4)

18-29-303.3 Plastic pipe, fittings and components.

Plastic pipe, fittings and components shall be third-party certified as conforming to NSF 14.

(Amend Coun. J. 10-14-21, p. 37722, Art. III, § 4)

18-29-303.4 Third-party certification.

Plumbing products and materials required by this chapter to be in compliance with a referenced standard shall be listed by a third-party certification agency as complying with the referenced standard. Products and materials shall be identified in accordance with Section 18-29-303.1.

(Amend Coun. J. 10-14-21, p. 37722, Art. III, § 4)

18-29-303.4.1 Reserved.

Editor's note – Coun. J. 10-14-21, p. 37722, Art. III, § 4, repealed § 18-29-303.4.1, which pertained to testing.

18-29-303.4.2 Reserved.

Editor's note – Coun. J. 10-14-21, p. 37722, Art. III, § 4, repealed § 18-29-303.4.2, which pertained to inspection and identification.

18-29-303.4.2.1 Reserved.

Editor's note – Coun. J. 10-14-21, p. 37722, Art. III, § 4, repealed § 18-29-303.4.2.1, which pertained to independent.

18-29-303.4.2.2 Reserved.

Editor's note – Coun. J. 10-14-21, p. 37722, Art. III, § 4, repealed § 18-29-303.4.2.2, which pertained to equipment.

18-29-303.4.2.3 Reserved.

Editor's note – Coun. J. 10-14-21, p. 37722, Art. III, § 4, repealed § 18-29-303.4.2.3, which pertained to personnel.

18-29-303.5 Cast-iron soil pipe, fittings and components.

Cast-iron soil pipes and fittings, and the couplings used to join these products together, shall be third-party listed and labeled. Third-party certifiers and third-party inspectors shall comply with the minimum inspection requirements of Annex A or Annex A1 of the ASTM and CISPI product standards indicated in this chapter for such products.

(Added Coun. J. 10-14-21, p. 37722, Art. III, § 4)

Disclaimer: This Code of Ordinances and/or any other documents that appear on this site may not reflect the most current legislation adopted by the Municipality. American Legal Publishing provides these documents for informational purposes only. These documents should not be relied upon as the definitive authority for local legislation. Additionally, the formatting and pagination of the posted documents varies from the formatting and pagination of the official copy. The official printed copy of a Code of Ordinances should be consulted prior to any action being taken. For further information regarding the official version of any of this Code of Ordinances or other documents posted on this site, please contact the Municipality directly or contact American Legal Publishing toll-free at 800-445-5588.

Hosted by: American Legal Publishing

Back to Code Library

Previous Doc

Next Doc