ARTICLE 4: ZONES

Section

4.1.   PURPOSE

4.2.   ESTABLISHMENT OF BOUNDARIES

4.3.   CATEGORIES OF LAND USES

   4.3.1.   Permitted Land Use

   4.3.2.   Special Exception Land Uses

   4.3.3.   Accessory Land Uses

   4.3.4.   Temporary Land Use

4.4.   ORGANIZATION OF LAND USES

   4.4.1.   General

   4.4.2.   Land Use Group

   4.4.3.   Land Use Class

   4.4.4.   Land Use Type

4.5.   MORE RESTRICTIVE ZONING

4.6.   ZONING OF LAND ANNEXED INTO THE CITY

4.7.   ZONES - PURPOSE

   4.7.1.   Open Space  Zone (OS)

   4.7.2.   Institutional Reserve (IR)

   4.7.3.   Rural Homestead Zone (RH)

   4.7.4.   Suburban Ranch Zone (SR)

   4.7.5.   Suburban Homestead Zone (SH)

   4.7.6.   Residence Zone (RX-1)

   4.7.7.   Residence Zone (RX-2)

   4.7.8.   Residence Zone (R-1)

   4.7.9.   Residence Zone (R-2)

   4.7.10.   Mobile Home Zone (MH-1)

   4.7.11.   Mobile Home Zone (MH-2)

   4.7.12.   Residence Zone (R-3)

   4.7.13.   Office Zone (O-1)

   4.7.14.   Office Zone (O-2)

   4.7.15.   Office Zone (O-3)

   4.7.16.   Parking Zone (P)

   4.7.17.   Recreational Vehicle  Zone (RV)

   4.7.18.   Neighborhood Commercial Zone (NC)

   4.7.19.   Rural Village Center Zone (RVC)

   4.7.20.   Commercial Zone (C-1)

   4.7.21.   Commercial Zone (C-2)

   4.7.22.   Commercial Zone (C-3)

   4.7.23.   Mixed Use  Zone (MU)

   4.7.24.   Planned Area Development (PAD)

   4.7.25.   Planned Community Development (PCD)

   4.7.26.   Office/Commercial/Residential Zone (OCR-1)

   4.7.27.   Office/Commercial/Residential Zone (OCR-2)

   4.7.28.   Park Industrial Zone (P-I)

   4.7.29.   Light Industrial Zone (I-1)

   4.7.30.   Heavy Industrial Zone (I-2)

4.8.   USE TABLES

   4.8.1.   General

   4.8.2.   Organization

   4.8.3.   Permitted Uses: Rural and Suburban Residential zones

   4.8.4.   Permitted Uses: Urban Residential zones

   4.8.5.   Permitted Uses: Office zones

   4.8.6.   Permitted Uses: Commercial and Mixed Use  Zones

   4.8.7.   Permitted Uses: Industrial Zones

   4.8.8.   Permitted Uses: Special Use Zones (1) - OS, IR, R, & RV

   4.8.9.   Permitted Uses: Special Use Zones (2) - NC, RVC, & MU

4.9.   USE-SPECIFIC STANDARDS

   4.9.1.   General

   4.9.2.   Agricultural Use Group

   4.9.3.   Civic Use Group

   4.9.4.   Commercial Services Use Group

   4.9.5.   Industrial Use Group

   4.9.6.   Recreation Use Group

   4.9.7.   Residential Use Group

   4.9.8.   Restricted Adult Activities Use Group

   4.9.9.   Retail Trade Use Group

   4.9.10.   Storage Use Group

   4.9.11.   Utilities Use Group

   4.9.12.   Wholesaling Use Group

   4.9.13.   General Standards, Restrictions, and Exceptions

4.10.   ACCESSORY USES , BUILDINGS , AND STRUCTURES

4.11.   TEMPORARY USE OR BUILDING

   4.11.1.   Qualification for Permit

   4.11.2.   Bond Required

   4.11.3.   Refund

   4.11.4.   Removal

   4.11.5.   Forfeiture

   4.11.6.   Time Limit

4.1. PURPOSE

   The zones described in this article are established to regulate and separate the locations of land uses as appropriate.

4.2. ESTABLISHMENT OF BOUNDARIES

   The boundaries of each zone are determined and defined in accordance with the provisions of the Unified Development Code (UDC) .

4.3. CATEGORIES OF LAND USES

   There are four categories of land uses : permitted, special exception, accessory, and temporary.

4.3.1. PERMITTED LAND USE

   A.   For the purposes of this article, a permitted land use refers to a principal use that is permitted within a particular zone subject to compliance with all applicable use-specific standards and other regulations as described below and typically does not require legislative action for approval. A principal use is the main use to which the premises is devoted and the primary purpose for which the premises exist.

   B.   The principal permitted land uses within each zone are identified in Tables 4.8-1 through 4.8-7.

   C.   Principal permitted land uses are subject to the following when applicable:

      1.   UDC regulations and standards, including, but not limited to, the zone ’s exceptions and general restrictions provided in Section 4.9.13, the use specific standards provided in Tables 4.8-1 through 4.8-7, Article 5: Overlay Zones, Article 6: Dimensional Standards and Measurements, and Article 7: Development Standards;

      2.   Application submittal requirements and fees provided in the Administrative Manual; and,

      3.   Standards provided in the Technical Standards Manual.