Loading...
Application for a development permit shall be presented to the floodplain administrator on forms furnished by him/her and may include, but not be limited to, plans in duplicate drawn to scale showing the location, dimensions, and elevation of proposed landscape alterations, existing and proposed structures, including the placement of manufactured homes, and the location of the foregoing in relation to areas of special flood hazard. Additionally, the following information is required:
A. Elevation (in relation to mean sea level), of the lowest floor (including basement) of all new and substantially improved structures;
B. Elevation in relation to mean sea level to which any nonresidential structure shall be floodproofed;
C. A certificate from a registered professional engineer or architect that the nonresidential floodproofed structure shall meet the floodproofing criteria of subsection 13.74.071B of this chapter;
D. Description of the extent to which any watercourse or natural drainage will be altered or relocated as a result of proposed development;
E. Maintain a record of all such information in accordance with subsection 13.74.061A of this article;
Approval or denial of a development permit by the floodplain administrator shall be based on all of the provisions of this chapter and the following relevant factors:
A. The danger to life and property due to flooding or erosion damage;
B. The susceptibility of the proposed facility and its contents to flood damage and the effect of such damage on the individual owner;
C. The danger that materials may be swept onto other lands to the injury of others;
D. The compatibility of the proposed use with existing and anticipated development;
E. The safety of access to the property in times of flood for ordinary and emergency vehicles;
F. The costs of providing governmental services during and after flood conditions including maintenance and repair of streets and bridges, and public utilities and facilities such as sewer, gas, electrical and water systems;
G. The expected heights, velocity, duration, rate of rise and sediment transport of the floodwaters and the effects of wave action, if applicable, expected at the site;
H. The necessity to the facility of a waterfront location, where applicable;
I. The availability of alternative locations, not subject to flooding or erosion damage, for the proposed use;
J. The relationship of the proposed use to the comprehensive plan for that area. (Ord. 2012-15, 9-20-2012)
A. The appeal board as established by the community shall hear and render judgment on requests for variances from the requirements of this chapter.
B. The appeal board shall hear and render judgment on an appeal only when it is alleged there is an error in any requirement, decision, or determination made by the floodplain administrator in the enforcement or administration of this chapter.
C. Any person or persons aggrieved by the decision of the appeal board may appeal such decision in the courts of competent jurisdiction.
D. The floodplain administrator shall maintain a record of all actions involving an appeal and shall report variances to the federal emergency management agency upon request.
E. Variances may be issued for the reconstruction, rehabilitation or restoration of structures listed on the national register of historic places or the state inventory of historic places, without regard to the procedures set forth in the remainder of this chapter.
F. Variances may be issued for new construction and substantial improvements to be erected on a lot of one-half (1/2) acre or less in size contiguous to and surrounded by lots with existing structures constructed below the base flood level, providing the relevant factors in section 13.74.062 of this chapter have been fully considered. As the lot size increases beyond the one-half (1/2) acre, the technical justification required for issuing the variance increases.
G. Upon consideration of the factors noted above and the intent of this chapter, the appeal board may attach such conditions to the granting of variances as it deems necessary to further the purpose and objectives of this chapter (section 13.74.020 of this chapter).
H. Variances shall not be issued within any designated floodway if any increase in flood levels during the base flood discharge would result.
I. Variances may be issued for the repair or rehabilitation of historic structures upon a determination that the proposed repair or rehabilitation will not preclude the structure's continued designation as a historic structure and the variance is the minimum necessary to preserve the historic character and design of the structure.
J. Prerequisites for granting variances:
1. Variances shall only be issued upon a determination that the variance is the minimum necessary, considering the flood hazard, to afford relief.
2. Variances shall only be issued upon:
a. Showing a good and sufficient cause;
b. A determination that failure to grant the variance would result in exceptional hardship to the applicant; and
c. A determination that the granting of a variance will not result in increased flood heights, additional threats to public safety, extraordinary public expense, create nuisances, cause fraud on or victimization of the public, or conflict with existing local laws or ordinances.
3. Any applicant to whom a variance is granted shall be given written notice that the structure will be permitted to be built with the lowest floor elevation below the base flood elevation, and that the cost of flood insurance will be commensurate with the increased risk resulting from the reduced lowest floor elevation.
K. Variances may be issued by a community for new construction and substantial improvements and for other development necessary for the conduct of a functionally dependent use provided that:
1. The criteria outlined in subsections A through I of this section are met, and
2. The structure or other development is protected by methods that minimize flood damages during the base flood and create no additional threats to public safety. (Ord. 2012-15, 9-20-2012)
ARTICLE V. PROVISIONS FOR FLOOD HAZARD REDUCTION
In all areas of special flood hazards the following provisions are required for all new construction and substantial improvements:
A. All new construction or substantial improvements shall be designed (or modified) and adequately anchored to prevent flotation, collapse or lateral movement of the structure resulting from hydrodynamic and hydrostatic loads, including the effects of buoyancy;
B. All new construction or substantial improvements shall be constructed by methods and practices that minimize flood damage;
C. All new construction or substantial improvements shall be constructed with materials resistant to flood damage;
D. All new construction or substantial improvements shall be constructed with electrical, heating, ventilation, plumbing, and air conditioning equipment and other service facilities that are designed and/or located so as to prevent water from entering or accumulating within the components during conditions of flooding;
E. All new and replacement water supply systems shall be designed to minimize or eliminate infiltration of floodwaters into the system;
F. New and replacement sanitary sewage systems shall be designed to minimize or eliminate infiltration of floodwaters into the system and discharge from the systems into floodwaters; and
G. On site waste disposal systems shall be located to avoid impairment to them or contamination from them during flooding. (Ord. 2012-15, 9-20-2012)
A. Residential Construction: New construction and substantial improvement of any residential structure shall have the lowest floor (including basement), elevated to or above the base flood elevation. A registered professional engineer, architect, or land surveyor shall submit a certification to the floodplain administrator that the standard of this subsection as proposed in this chapter, is satisfied.
B. Nonresidential Construction: New construction and substantial improvements of any commercial, industrial or other nonresidential structure shall either have the lowest floor (including basement) elevated to or above the base flood level or together with attendant utility and sanitary facilities, be designed so that below the base flood level the structure is watertight with walls substantially impermeable to the passage of water and with structural components having the capability of resisting hydrostatic and hydrodynamic loads and effects of buoyancy. A registered professional engineer or architect shall develop and/or review structural design, specifications, and plans for the construction, and shall certify that the design and methods of construction are in accordance with accepted standards of practice as outlined in this subsection. A record of such certification which includes the specific elevation (in relation to mean sea level) to which such structures are floodproofed shall be maintained by the floodplain administrator.
C. Enclosures: New construction and substantial improvements, with fully enclosed areas below the lowest floor that are usable solely for parking of vehicles, building access or storage in an area other than a basement and which are subject to flooding shall be designed to automatically equalize hydrostatic flood forces on exterior walls by allowing for the entry and exit of floodwaters. Designs for meeting this requirement must either be certified by a registered professional engineer or architect or meet or exceed the following minimum criteria:
1. A minimum of two (2) openings having a total net area of not less than one square inch for every square foot of enclosed area subject to flooding shall be provided.
2. The bottom of all openings shall be no higher than one foot (1') above grade.
3. Openings may be equipped with screens, louvers, valves, or other coverings or devices provided that they permit the automatic entry and exit of floodwaters.
D. Manufactured Homes:
1. Require that all manufactured homes to be placed within zone A on a community's FHBM or FIRM shall be installed using methods and practices which minimize flood damage. For the purposes of this requirement, manufactured homes must be elevated and anchored to resist flotation, collapse, or lateral movement. Methods of anchoring may include, but are not limited to, use of over the top or frame ties to ground anchors. This requirement is in addition to applicable state and local anchoring requirements for resisting wind forces.
2. Require that manufactured homes that are placed or substantially improved within zones A1-30, AH, and AE on the community's FIRM on sites: a) outside of a manufactured home park or subdivision, b) in a new manufactured home park or subdivision, c) in an expansion to an existing manufactured home park or subdivision, or d) in an existing manufactured home park or subdivision on which a manufactured home has incurred "substantial damage" as a result of a flood, be elevated on a permanent foundation such that the lowest floor of the manufactured home is elevated to or above the base flood elevation and be securely anchored to an adequately anchored foundation system to resist flotation, collapse, and lateral movement.
3. Require that manufactured homes be placed or substantially improved on sites in an existing manufactured home park or subdivision within zones A1-30, AH and AE on the community's FIRM that are not subject to the provisions of this section be elevated so that either:
a. The lowest floor of the manufactured home is at or above the base flood elevation, or
b. The manufactured home chassis is supported by reinforced piers or other foundation elements of at least equivalent strength that are no less than thirty six inches (36") in height above grade and be securely anchored to an adequately anchored foundation system to resist flotation, collapse, and lateral movement.
E. Recreational Vehicles: Require that recreational vehicles placed on sites within zones A1-30, AH, and AE on the community's FIRM either:
1. Be on the site for fewer than one hundred eighty (180) consecutive days,
2. Be fully licensed and ready for highway use, or
3. Meet the permit requirements of section 13.74.062 of this chapter, and the elevation and anchoring requirements for "manufactured homes" in this section. A recreational vehicle is ready for highway use if it is on its wheels or jacking system, is attached to the site only by quick disconnect type utilities and security devices, and has no permanently attached additions. (Ord. 2012-15, 9-20-2012)
C. Base flood elevation data shall be generated for subdivision proposals and other proposed development including the placement of manufactured home parks and subdivisions which is greater than fifty (50) lots or five (5) acres, whichever is less, if not otherwise provided pursuant to section 13.74.052 or subsection 13.74.061H of this chapter.
D. All subdivision proposals including the placement of manufactured home parks and subdivisions shall have adequate drainage provided to reduce exposure to flood hazards.
E. All subdivision proposals including the placement of manufactured home parks and subdivisions shall have public utilities and facilities such as sewer, gas, electrical and water systems located and constructed to minimize or eliminate flood damage. (Ord. 2012-15, 9-20-2012)
Located within the areas of special flood hazard established in section 13.74.052 of this chapter, are areas designated as shallow flooding. These areas have special flood hazards associated with base flood depths of one to three feet (3') where a clearly defined channel does not exist and where the path of flooding is unpredictable and where velocity flow may be evident. Such flooding is characterized by ponding or sheet flow; therefore, the following provisions apply: (Ord. 2012-15, 9-20-2012)
A. All new construction and substantial improvements of residential structures have the lowest floor (including basement) elevated above the highest abutting grade at least as high as the depth number specified in feet on the community's FIRM (at least 2 feet if no depth number is specified). (Ord. 2015-02, 2-5-2015)
B. All new construction and substantial improvements of nonresidential structures:
1. Have the lowest floor (including basement) elevated above the highest adjacent grade at least as high as the depth number specified in feet on the community's FIRM (at least 2 feet if no depth number is specified); or
2. Together with attendant utility and sanitary facilities be designed so that below the base flood level the structure is watertight with walls substantially impermeable to the passage of water and with structural components having the capability of resisting hydrostatic and hydrodynamic loads of effects of buoyancy.
C. A registered professional engineer or architect shall submit a certification to the floodplain administrator that the standards of this section, as proposed in section 13.74.062 of this chapter, are satisfied.
D. Require within zones AH or AO adequate drainage paths around structures on slopes, to guide floodwaters around and away from proposed structures. (Ord. 2012-15, 9-20-2012)
Loading...