Loading...
Cluster-style mailboxes serving housing developments situated on any public street or roadway shall be located between the sidewalk and curb, outside of the three-foot (3') clear zone. Cluster-style mailboxes shall not be installed anywhere within a cul-de-sac bulb. Cluster-style mailboxes shall have a 4' concrete access from the public street and the public sidewalk. The location of the cluster-style mailboxes shall not exceed 300 feet from the property line of those residents served by that cluster-style mailbox. Cluster-style boxes shall be located on property lines on the same side as what the future no-parking areas will be, and the cluster-style mailboxes shall be located within 100 feet of intersections with existing pedestrian ramps when not in conflict with the previously stated requirements. The location of the cluster-style mailbox is to be approved by the City and by the USPS.
The cost of installation, including but not limited to box units and concrete pad, shall be borne by the developer, and subsequent maintenance shall be carried out by the USPS.
No driveway or street access shall be constructed within five (5) feet of a cluster-style mailbox.
While curbside mailboxes may be installed in developments constructed and already receiving mail service before the adoption of this chapter, the mailbox owner must comply with the following installation requirements:
1. The bottom of the mailbox shall be 42 inches from the top of curb. On streets without curbs, the bottom of the mailbox shall be 48 inches from the edge of pavement, as defined by USPS installation requirements.
2. Lateral placement of the mailbox shall be 6 inches to 8 inches from the face of the curb, as defined by USPS installation requirements.
3. The mailbox support post shall be of a “breakaway support” design, as defined by AASHTO.
4. The post-to-box attachment shall be of sufficient strength to prevent the box from separating from the post if a vehicle strikes the post.
A custom-built mailbox may be installed in developments constructed and already receiving mail service before the adoption of this chapter if an application for approval of a custom-built mailbox is submitted to the City for review and is approved. A custom-built mailbox must conform to the following requirements and the rules set forth in the application:
1. The structure supporting the mailbox shall be at least 12 inches from the back of curb.
2. The mailbox structure shall not exceed the dimensions of 2 feet in width, 2 feet in depth, 5 feet in height.
3. The mailbox structure shall be located on a concrete pad, 2 feet 6 inches wide, 2 feet 6 inches deep, and 4 inches thick. The mailbox structure shall not be permanently affixed to the concrete pad in an attempt to make structure rigid.
4. The local postmaster shall approve and sign off on the application before submittal to the City.
The purchase, installation, and maintenance of mailboxes are the responsibility of the property owner. When two or more property owners share a mailbox post, they are equally responsible for the purchase, installation, and maintenance of the post and each property owner is responsible for their individual mailbox.
Any type of mailbox located in the City right-of-way is subject to damage or destruction, at any time, as a result of the City or a person with a utility easement entering upon the City right-of-way to construct, repair or maintain the utilities located in the City right-of-way or as a result of the City engaging in activities to maintain the public street or right-of-way, such as snow removal, pavement repair or street cleaning. If any mailbox located in the City right-of-way is damaged during such activities, the City or the utility that damaged the mailbox shall either replace the mailbox with a standard curbside mailbox that complies with Section 157.06 of this chapter or reimburse the property owner for the repair or replacement of the mailbox up to a maximum replacement amount set by the City Council in a resolution.
(Ch. 157 - Ord. 2089 - Dec. 21 Supp.)