CHAPTER 1042: SEWERS GENERALLY
Editor’s note:
   The city adopted a Stormwater Management Plan by Ordinance 2003-187, passed July 7, 2003. Copies of the ordinance and of the Plan may be obtained, at cost, in the office of the Clerk of Council.
Section
   1042.01   Definitions
   1042.02   Connections and the like; permit required
   1042.025   Fee for connection to the Aurora/Liberty sanitary sewer project
   1042.03   Permit issuance; deposit
   1042.04   Responsibility for installation of building sewers
   1042.05   Owner to bear cost of installation
   1042.06   Inspections
   1042.07   Separate sewer for each building; exceptions; tie-in required
   1042.08   Existing interior and exterior building sewers
   1042.09   Pipe specifications
   1042.10   Sewer grade and direction
   1042.11   Joints gastight and watertight
   1042.12   Minimum fall
   1042.13   Pipe interior to be clean
   1042.14   Location and depth
   1042.15   Sewers crossing unstable soil or close to trees
   1042.16   Excavations
   1042.17   Separate trenches
   1042.18   Backfilling
   1042.19   Connection with wye branch
   1042.20   Permit to open street; warning devices
   1042.21   Repair or restoration of drains and lines
   1042.22   Connections under sidewalks
   1042.23   Incidental construction
   1042.24   Test tees generally
   1042.25   Test tees in driveways
   1042.26   Owner doing own work
   1042.27   Inspection and cleaning of laterals
   1042.28   Temporary lift stations prohibited
   1042.29   Notification concerning grinder pumps
   1042.99   Penalty
   CROSS REFERENCES
   Building sewers, see § 1406.07
   Connections to public sewers, see § 1482.08
   Plastic sewer pipe, see § 1406.07
   Sanitation, drainage and sewerage, see Ch. 1482
   Sewer installers, see Ch. 860
   Sewers in subdivisions, see §§ 1250.04, 1250.15