Skip to code content (skip section selection)
Compare to:
Pima County Overview
Pima County, AZ Code of Ordinances
PIMA COUNTY, ARIZONA CODE
Publisher's Introduction
Title 1 GENERAL PROVISIONS
Title 2 ADMINISTRATION AND PERSONNEL
Title 3 REVENUE AND FINANCE
Title 4 INDIGENT HEALTH CARE
Title 5 BUSINESS TAXES, LICENSES AND REGULATIONS
Title 6 ANIMALS
Title 7 ENVIRONMENTAL QUALITY
Title 8 HEALTH AND SAFETY
Title 9 PUBLIC PEACE, MORALS AND WELFARE
Title 10 TRAFFIC AND HIGHWAYS
Title 11 PIMA COUNTY PROCUREMENT CODE
Title 12 (RESERVED)
Title 13 PUBLIC SERVICES
Title 14 RENEWABLE ENERGY INCENTIVE DISTRICT (REID)
Title 15 BUILDINGS AND CONSTRUCTION
Title 16 FLOODPLAIN MANAGEMENT
Title 17 AIR QUALITY CONTROL
Title 18 ZONING
Chapter 18.01 GENERAL PROVISIONS
Chapter 18.03 GENERAL DEFINITIONS
Chapter 18.05 ZONES, MAPS AND BOUNDARIES
Chapter 18.07 GENERAL REGULATIONS AND EXCEPTIONS
Chapter 18.09 GENERAL RESIDENTIAL AND RURAL ZONING PROVISIONS
Chapter 18.11 TH TRAILER HOMESITE ZONE
Chapter 18.12 IR INSTITUTIONAL RESERVE ZONE
Chapter 18.13 RH RURAL HOMESTEAD ZONE [1]
Chapter 18.14 GR-1 RURAL RESIDENTIAL ZONE
Chapter 18.15 ML MOUNT LEMMON ZONE
Chapter 18.17 SR SUBURBAN RANCH ZONE*
Chapter 18.18 SR-2 SUBURBAN RANCH ESTATE ZONE
Chapter 18.19 SH SUBURBAN HOMESTEAD ZONE
Chapter 18.21 CR-1 SINGLE RESIDENCE ZONE
Chapter 18.23 CR-2 SINGLE RESIDENCE ZONE
Chapter 18.25 CR-3 SINGLE RESIDENCE ZONE
Chapter 18.27 CR-4 MIXED-DWELLING TYPE ZONE
Chapter 18.29 CR-5 MULTIPLE RESIDENCE ZONE
Chapter 18.31 TR TRANSITIONAL ZONE
Chapter 18.33 CMH-1 COUNTY MANUFACTURED AND MOBILE HOME - 1 ZONE
Chapter 18.35 CMH-2 COUNTY MANUFACTURED AND MOBILE HOME - 2 ZONE
Chapter 18.37 MU MULTIPLE USE ZONE
Chapter 18.39 GENERAL COMMERCIAL STANDARDS
Chapter 18.40 MR MAJOR RESORT ZONE
Chapter 18.41 RVC RURAL VILLAGE CENTER ZONE
Chapter 18.43 CB-1 LOCAL BUSINESS ZONE
Chapter 18.45 CB-2 GENERAL BUSINESS ZONE
Chapter 18.47 INDUSTRIAL ZONING CLASSIFICATIONS
Chapter 18.49 CPI CAMPUS PARK INDUSTRIAL ZONE
Chapter 18.51 CI-1 LIGHT INDUSTRIAL/WAREHOUSING ZONE
Chapter 18.53 CI-2 GENERAL INDUSTRIAL ZONE
Chapter 18.55 CI-3 HEAVY INDUSTRIAL ZONE*
Chapter 18.57 AIRPORT ENVIRONS AND FACILITIES*
Chapter 18.58 HELIPORTS AND HELISTOPS
Chapter 18.59 GC GOLF COURSE ZONE
Chapter 18.61 HILLSIDE DEVELOPMENT OVERLAY ZONE*
Chapter 18.63 HISTORIC ZONE
Chapter 18.65 (RESERVED)
Chapter 18.67 BUFFER OVERLAY ZONE
Chapter 18.68 INFILL OVERLAY ZONE
Chapter 18.69 SUBDIVISION STANDARDS
Chapter 18.70 MINOR LANDS DIVISION
Chapter 18.71 DEVELOPMENT PLAN STANDARDS*
Chapter 18.72 NATIVE PLANT PRESERVATION
Chapter 18.73 LANDSCAPING, BUFFERING AND SCREENING STANDARDS*
Chapter 18.75 OFF-STREET PARKING AND LOADING STANDARDS
Chapter 18.77 ROADWAY FRONTAGE STANDARDS
Chapter 18.78 GATEWAY OVERLAY ZONE
Chapter 18.79 SIGN STANDARDS*
Chapter 18.81 GRADING STANDARDS
Chapter 18.83 ADDRESS STANDARDS
Chapter 18.85 (RESERVED)
Chapter 18.87 (RESERVED)
Chapter 18.89 COMPREHENSIVE PLAN [2]
Chapter 18.90 SPECIFIC PLANS
Chapter 18.91 REZONING PROCEDURES
Chapter 18.92 TRANSFER OF DEVELOPMENT RIGHTS
Chapter 18.93 BOARD OF ADJUSTMENT VARIANCES, TEMPORARY USE PERMITS AND INTERPRETATIONS*
Chapter 18.95 COMPLIANCE AND ENFORCEMENT*
Chapter 18.97 CONDITIONAL USE PROCEDURES
Chapter 18.99 REVIEW COMMITTEES
Chapter 18.101 ADMINISTRATORS
Title 19 ROADWAY DEVELOPMENT FEE
Title 20 THE SMALL BUSINESS ENTERPRISE PARTICIPATION PROGRAM
Title 21 PUBLIC LANDS AND FACILITIES
STATUTORY REFERENCES FOR ARIZONA COUNTIES
CROSS-REFERENCE TABLE
ORDINANCE LIST AND DISPOSITION TABLE
Chapter 18.55
CI-3 HEAVY INDUSTRIAL ZONE*
18.55.010   Purpose.
18.55.020   Compliance review.
18.55.030   Permitted uses.
18.55.040   Conditional uses.
18.55.050   Development standards—General.
18.55.060   Development standards—Detached accessory buildings.
18.55.010   Purpose.
   A.   The purpose of this zone is to fulfill the requirements of A.R.S. Section 11-821.01 which requires that counties adopt an industrial zone for industries which cannot meet the performance standards of more restrictive zones, in order that such uses may be located in areas such that they could expect reasonable protection.
(Ord. 1992-103 § 1 (part), 1992)
18.55.020   Compliance review.
   A.   Use Permit Requirement.
      1.   All use land and erection, moving, alteration or enlargement of a building pursuant to this chapter shall require a use permit issued by the zoning inspector.
      2.   The applicant for a use permit shall demonstrate conformance with all federal, state or local laws applicable to the use prior to the issuance of a use permit.
      3.   An approved development plan in accordance with Chapter 18.71 (Development Plan) shall be required prior to the issuance of a use permit.
      4.   A use permit shall be valid for the duration of the use, provided the use remains in conformance with the terms of approval. If a use is discontinued for more than twelve months, the permit shall be deemed null and void, and reapplication for a new use permit shall be necessary.
   B.   Type 3 Conditional Permit Requirement.
      1.   Due to the greater potential for nuisance or hazard than of uses permitted in other zones, all use of land and erection, moving, alteration or enlargement of a building pursuant to the conditional uses of Section 18.55.040 shall require a Type 3 permit in accordance with Chapter 18.97.
      2.   The applicant shall include with the conditional use permit application an environmental assessment, prepared by a qualified professional, which shall address the following issues:
         a.   The effects of the facility on air quality and water quality;
         b.   The amount of wastes to be produced at the facility and the proposed methods of disposal;
         c.   The amount and type of hazardous materials to be used at the facility and the type of storage and containment to be used;
         d.   A description of the hazards associated with the materials at the facility;
         e.   A worst case scenario for a release of the hazardous materials at the facility; and
         f.   A listing of environmental permits required by the facility and their status.
      3.   The commission or the supervisors may require that additional information be presented at the time of public hearing.
      4.   A minimum of thirty days prior to the hearing, the planning and development services department shall provide notice in accordance with Type 3 permit hearing procedures. Written notice shall be provided to all owners of property within one thousand feet of the subject property.
      5.   The supervisors may deny issuance of a permit or impose conditions that are reasonably necessary to prevent a nuisance or hazard, based on the information submitted or obtained during the conditional use permit process.
      6.   Time limits and time extension procedures shall be in accordance with Type 3 permit requirements.
(Ord. 1992-103 § 1 (part), 1992)
18.55.030   Permitted uses.
   A.   Nonindustrial accessory building or use: When located on the same building site.
   B.   Airport facilities: In accordance with Chapter 18.57 (AE).
(Ord. 1992-103 § 1 (part), 1992)
Loading...