(a) "DEP" shall mean the New York City Department of Environmental Preservation.
(b) "Power Tools" shall mean all tools other than those powered solely by the person using them, including pneumatic tools.
(c) "Responsible Party" shall mean, with respect to any activity regulated or covered by this chapter, the owner of the premises on or where such activity occurs, and any agent of the owner engaged in such activity or any participant in such activity, including contractors and subcontractors. Any agency of the City of New York may also be a responsible party.
(a) Pursuant to § 24-223(e)(4) of the New York City Administrative Code, the activities listed in this section shall constitute the list of construction activities with minimal noise impact and the mitigation measures applicable to such activities. The activities listed herein are not intended to impede or supersede the authority for Department of Buildings and Department of Transportation authorization that otherwise exists in the New York City Administrative Code.
(b) For the purpose of this chapter, the use of power tools within twenty-five feet of a legal residential unit within the building or abutting location is prohibited.
(c) The following interior construction activities within a structure before window placement are classified as creating a minimal noise impact:
1. Taping of dry wall without the use of power tools.
2. Paint application without power tools and without removal of existing material from the surface.
3. Caulking, without removal of existing material from the surface and without the use of power tools.
4. Interior plastering or spackling without removal of existing material from the surface.
5. Carpeting without the use of power tools.
6. Flash patching walls and floors without removal of existing material from the surface and without the use of power tools for the J3 occupancy group only.
7. Gluing interior moldings without the use of power tools.
8. Landscaping within the premise property line and without power tools and as further restricted pursuant to § 24-242 of the New York City Administrative Code.
9. Interior cleanup without power tools and without removing attached surface and wall material.
(d) The following exterior construction activities are classified as creating a minimal noise impact before window placement:
1. Installation of roofing membrane without the use of power tools; and
2. Insulation of non-structural and non-demolition activities without the use of power tools.
(e) Interior activities within a structure, after window placement, in new vacant and existing vacant buildings, are classified as creating a minimal noise impact so long as the following conditions are met:
1. All windows and doors shall be tightly sealed; and
2. Any openings to the outdoors that allow the external emission of noise are prohibited; and
3. Such work entails only non-structural and non-demolition construction activities as those activities are defined by the Department of Buildings or the Department of Transportation, as applicable.
(f) Interior construction activities within a structure, after window placement, in non-vacant buildings, are classified as creating a minimal noise impact so long as the following conditions are met:
1. Windows and doors shall be tightly sealed and;
2. Any openings to the outdoors that allow the external emission of noise are prohibited; and
3. Such work entails only non-structural and non-demolition construction activities as those activities are defined by applicable authorizing agencies; and
4. Such activities take place where the floors directly below and above the floor are unoccupied; and
5. Notice has been given, to the maximum extent possible, to all residents regarding the time, place and nature of the construction activities.
(g) All work performed pursuant to this section where power tools are permitted can only be performed when the responsible party, acting in good faith, selects and uses the quietist tools reasonably available for such work.
Loading...