CHAPTER 3127 – WOOD CONSTRUCTION
3127.01   Scope
3127.02   Species and Grade to be Marked on Drawings
3127.03   Supervision
3127.04   Approval of Fabricator of Glued Structural Members
3127.05   Minimum Requirements for Quality of Lumber
3127.06   Wood Posts
3127.07   Splicing of Structural Framing Members
3127.08   Exterior Stud Walls and Bearing Partitions
3127.09   Wall Sheathing
3127.10   Sheathing Paper
3127.11   Floors and Roofs
   Note: The legislative history of this chapter, except where specifically noted at the end of a section, is as follows: Ordinance No. 1116-A-85, passed February 10, 1986.
§ 3127.01 Scope
   The provisions of this chapter shall govern the quality and design of wood members used to support loads or withstand forces in buildings of one (1), two (2) and three (3) family dwelling units.
§ 3127.02 Species and Grade to be Marked on Drawings
   The species and grade or stress-grade, or lumber proposed for use to support loads or withstand forces shall be stated on all drawings submitted for the approval of the Commissioner.
Loading...