2-3(E)   RESIDENTIAL - MULTI-FAMILY LOW DENSITY ZONE DISTRICT (R-ML)

2-3(E)(1)   Purpose

The purpose of the R-ML zone district is to provide for a variety of low- to medium-density housing options. The primary land uses are townhouses and small-scale multi-family development, as well as civic and institutional uses to serve the surrounding residential area. Allowable uses are shown in Table 4-2-1.

2-3(E)(2)   Use and Development Standards

Table 2-3-9: R-ML Zone District Dimensional Standards Summary						Table 2-3-10: Other Applicable IDO Sections
See Table 5-1-1 for complete Dimensional Standards						Overlay Zones	Part 14-16-3
Development Type		Single- or Two-family Detached	Townhouse or other allowable use	Multi- family		Allowable Uses	14-16-4-2
						Use-specific Standards	14-16-4-3
						Dimensional Standards	14-16-5-1
						Site Design and Sensitive Lands	14-16-5-2
Site Standards						Access and Connectivity	14-16-5-3
A	Lot size, minimum	3,500 sq. ft.	2,200 sq. ft.	5,000 sq. ft.		Subdivision of Land	14-16-5-4
B	Lot width, minimum	35 ft.	22 ft.	50 ft.		Parking and Loading	14-16-5-5
C	Usable open space, minimum	≤1 BR: 225 sq. ft. / unit 2 BR:285 sq. ft. / unit ≥3 BR: 350 sq. ft. / unit UC-MS-PT: 50% reduction				Landscaping, Buffering, and Screening	14-16-5-6
						Walls and Fences	14-16-5-7
Setback Standards						Outdoor and Site Lighting	14-16-5-8
D	Front, minimum	15 ft.				Neighborhood Edges	14-16-5-9
E	Side, minimum	Interior: 5 ft. / Street side of corner lots: 10 ft. / UC-MS-PT: 0 ft.				Solar Access	14-16-5-10
						Building Design	14-16-5-11
F	Rear, minimum	15 ft.				Signs	14-16-5-12
Building Height						Operation and Maintenance	14-16-5-13
G	Building height, maximum	38 ft.

 

2-3(E)(3)   District Standards

None.