2-3(D)   RESIDENTIAL - TOWNHOUSE ZONE DISTRICT (R-T)

2-3(D)(1)   Purpose

The purpose of the R-T zone district is to accommodate a mix of single-family, two-family, and townhouse uses, as well as limited civic and institutional uses to serve the surrounding residential area. Other allowable uses are shown in Table 4-2-1.

2-3(D)(2)   Use and Development Standards

Table 2-3-7: R-T Zone District Dimensional Standards Summary					Table 2-3-8: Other Applicable IDO Sections
See Table 5-1-1 for complete Dimensional Standards					Overlay Zones	Part 14-16-3
Development Type		Single- or Two-family Detached	Townhouse or Other Allowable Use		Allowable Uses	14-16-4-2
					Use-specific Standards	14-16-4-3
					Dimensional Standards	14-16-5-1
Site Standards					Site Design and Sensitive Lands	14-16-5-2
A	Lot size, minimum	3,500 sq. ft.	2,200 sq. ft.		Access and Connectivity	14-16-5-3
B	Lot width, minimum	35 ft.	22 ft.		Subdivision of Land	14-16-5-4
C	Usable open space, minimum	N/A			Parking and Loading	14-16-5-5
					Landscaping, Buffering, and Screening	14-16-5-6
Setback Standards					Walls and Fences	14-16-5-7
D	Front, minimum	10 ft.			Outdoor and Site Lighting	14-16-5-8
E	Side, minimum	Interior: 5 ft. / Street side of corner lots: 10 ft. UC-MS-PT: 0 ft.			Neighborhood Edges	14-16-5-9
					Solar Access	14-16-5-10
F	Rear, minimum	15 ft.			Building Design	14-16-5-11
Building Height					Signs	14-16-5-12
G	Building height, maximum	26 ft.			Operation and Maintenance	14-16-5-13

 

2-3(D)(3)   District Standards

None.