Note: Several variables factor into determining a use’s required dimensional standards. See Section 6.3.2, Determining a Use’s Dimensional Standards, for further details.
Dimensional Standard | |||||
R-1 | R-2 | R-3 | MH-1 | MH-2 | |
Dimensional Standard | |||||
R-1 | R-2 | R-3 | MH-1 | MH-2 | |
Residential
(maximum) | SF:1/7,000 sf
|
SF: 1/5,000 sf
|
SF: 1/5,000 sf
|
SF/MH: 1/7,000 sf
|
SF/MH: 1/5,000 sf
|
SF (2 units): 2/10,000 sf | MF: 15/ | MF: 36/ | MF/MH Park: 8/ | MF & MH Park: 15/ | |
/ (minimum) |
SF (1 unit): 7,000 sf SF (2 units): 10,000 sf Nonres: see Exceptions | 5,000 sf | SF: 5,000 sf
MF/Nonres: 0
|
7,000 sf | 5,000 sf |
(maximum) |
70% | SF: 70%
MF: 75%
Nonres: see Exceptions
|
70% | 70% | SF, MH, Res. Care Services: 70%
MF & MH Park: 75%
Nonres: see Exceptions
|
Height (maximum) | 25' | 25' | SF, Civic Uses, & Admin/Prof Offices: 25' MF/Nonres: 40' | 25' | 25' |
[Standard based on the proposed use’s adjacency to a residential or nonresidential
or ] | |||||
Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | |
Res Use  Res. |
6' or 2/3(H)* | 6' or 2/3(H)* | 6' or 2/3(H)* | 6' or 2/3(H)* | 6' or 2/3(H)* |
Res Use Nonres
| 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* |
Nonres Use Res or Nonres
| 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* | 10' or ¾(H)* |
* The greater of the two dimensions applies
Key:
(H) =
of the proposed exterior
wall
MF = Multifamily
(Section 6.3.3.C)
MH = Mobile Home Dwelling (Section 6.3.3.A)
MH Park = Mobile Home Park (Section 6.3.3.B)
N/A = Not Applicable
Nonres = Nonresidential (Section 6.3.3.D or .E, whichever is applicable)
Res = Residential (Section 6.3.3.H or .I, whichever is applicable)
SF = Single-
Use (Section 6.3.3.J)
sf = square feet
=
to(Am. Ord. 11070, 5/14/2013)