Note: Several variables factor into determining a use’s required dimensional standards. See Section 6.3.2, Determining a Use’s Dimensional Standards, for further details.
Dimensional Standard | |||||
C-1 | C-2 | C-3 | OCR-1 | OCR-2 | |
Dimensional Standard | |||||
C-1 | C-2 | C-3 | OCR-1 | OCR-2 | |
Residential (maximum) | 36/ | 44/ | 87/ |
N/A | N/A |
/ (minimum) |
0 | 0 | 0 | 0 | 0 |
(maximum) |
Res: 75% Nonres: N/A | Res: 70% Nonres: N/A | Res: 80% Nonres: N/A | Res: 80% Nonres: N/A | Res: 80% Nonres: N/A |
Height (maximum) | Res: 25' Nonres: 30' | 40' | 75' | 140' | 300' |
[Standard based on the proposed use’s adjacency to a residential or nonresidential
or ] | |||||
Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | |
Res Use  Res |
10' or ¾(H)* | 10' or ¾(H)* | 1½(H) | 1½(H) | 1½(H) |
Res Use Nonres |
10' or ¾(H)* | 10' or ¾(H)* | 0 | 0 | 0 |
Nonres Use Res |
1½(H) | 1½(H) | 1½(H) | 2(H) | 2(H) |
Nonres Use Nonres |
0 | 0 | 0 | 0 | 0 |
* The greater of the two dimensions applies
Key:
(H) =
of the proposed exterior
wall
MF = Multifamily
(Section 6.3.3.C)
MH = Mobile Home Dwelling (Section 6.3.3.A)
MH Park = Mobile Home Park (Section 6.3.3.B)
N/A = Not Applicable
Nonres = Nonresidential (Section 6.3.3.D or .E, whichever is applicable)
Res = Residential (Section 6.3.3.H or .I, whichever is applicable)
SF = Single-
Use (Section 6.3.3.J)
sf = square feet
=
to(Am. Ord. 11070, 5/14/2013)