Note: Several variables factor into determining a use’s required dimensional standards. See Section 6.3.2, Determining a Use’s Dimensional Standards, for further details.
Dimensional Standard | |||||
RH | SR | SH | RX-1 | RX-2 |
Dimensional Standard | |||||
RH | SR | SH | RX-1 | RX-2 | |
Residential
(maximum) | 1/180,000 sf | 1/144,000 sf | 2/36,000 sf | 1/36,000 sf | 1/16,000 sf |
/
(minimum) | 180,000 sf | 144,000 sf | 36,000 sf | 36,000 sf | 16,000 sf |
(maximum) | Res: N/A Nonres: 20% | Res: N/A Nonres: 15% | Res: N/A Nonres: 15% | Res: N/A Nonres: 15% | Res: N/A Nonres: 15% |
Height (maximum) | 30' | 30' | 30' | 30' | 25' |
[Standard based on the proposed use’s adjacency to a residential or nonresidential or ] | |||||
Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | Section 6.4.5.C | |
Res Use Res |
25' | 25' | 20' | 20' | 20' |
Res Use Nonres |
(H) | (H) | (H) | (H) | (H) |
Nonres Use Res |
4(H) | 4(H) | 20' | 20' | 20' |
Nonres Use Nonres |
0' | 0' | 0' | 0' | 0' |
Key:
(H) = Height of the proposed exterior
wall
MF = Multifamily
(Section 6.3.3.C)
MH = Mobile Home Dwelling (Section 6.3.3.A)
MH Park = Mobile Home Park (Section 6.3.3.B)
N/A = Not Applicable
Nonres = Nonresidential (Section 6.3.3.D or .E, whichever is applicable)
Res = Residential (Section 6.3.3.H or .I, whichever is applicable)
SF = Single-
Use (Section 6.3.3.J)
sf = square feet
=
to