TABLE 6.3-3.A: DIMENSIONAL STANDARDS FOR THE O-1, O-2, & O-3 ZONES

Note: Several variables factor into determining a use’s required dimensional standards. See Section 6.3.2, Determining a Use’s Dimensional Standards, for further details.

Dimensional Standard	Zone
	0-1	0-2	0-3
Residential Density (maximum)	8/acre	8/acre	22/acre
Lot Size /Site Area (minimum)	Res: 7,000 sf Nonres: 10,000 sf	Res: 5,000 sf Nonres: 0 sf	Res: 5,000 sf Nonres: 0 sf
Lot Coverage (maximum)	Res: 70% Nonres: N/A	Res: 70% Nonres: N/A	Res: 75% Nonres: N/A
Height (maximum)	Res, Office: 16' Other: 25'	26'	Res: 25' Nonres: 40'
Perimeter Yard [Standard based on the proposed use’s adjacency to a residential or nonresidential zone or street ]
Street	Section 6.4.5.C	Section 6.4.5.C	Section 6.4.5.C
Res Use Res or Nonres Zone	10' or ¾(H)*	10' or ¾(H)*	10' or ¾(H)*
Nonres Use Res or Nonres Zone	10' or ¾(H)*	10' or ¾(H)*	10' or ¾(H)*

 

* The greater of the two dimensions applies

Key:

(H) = Height of the proposed exterior building wall

MF = Multifamily Development (Section 6.3.3.C)

MH = Mobile Home Dwelling (Section 6.3.3.A)

MH Park = Mobile Home Park (Section 6.3.3.B)

N/A = Not Applicable

Nonres = Nonresidential (Section 6.3.3.D or .E, whichever is applicable)

Res = Residential (Section 6.3.3.H or .I, whichever is applicable)

SF = Single-family Use (Section 6.3.3.J)

sf = square feet

= adjacent to

(Am. Ord. 11070, 5/14/2013)