6.3.3. EXPLANATION AND APPLICABILITY OF TERMS USED IN THE DIMENSIONAL STANDARD TABLES

   The following is an explanation and applicability of frequently used terms in the dimensional standard tables:

   A.   Mobile Home Dwelling

   For the purposes of determining the applicable dimensional standards, a mobile home is considered a residential use. See Section 11.3.7.C for the definition of mobile home dwelling.

   B.   Mobile Home Park

   For the purposes of determining the applicable dimensional standards, a mobile home park is considered a nonresidential use. See Section 11.3.7.C.1 for the definition of mobile home park.

   C.   Multifamily Development

   For the purposes of determining the applicable dimensional standards, multifamily development is considered a nonresidential use. See Section 11.3.7.A.3 for the definition of multifamily development .

   D.   Nonresidential Use

   For the purposes of determining the applicable dimensional standards, the following uses as defined in Section 11.3 are considered nonresidential uses:

      1.   A use from the Agricultural, Civic, Commercial, Industrial, Restricted Adult Activities, Retail, Storage, Storage, or Wholesaling Use Groups;

      2.   Group Dwelling, except as provided in Section 6.3.3.H.7;

      3.   Multifamily Development ;

      4.   Mobile Home Park; and,

      5.   Residential Care Service Uses, except as provided in Section 6.3.3.H.4.

   E.   Nonresidential Zone

   For the purposes of determining the applicable perimeter yard standard, the following are considered nonresidential zones : O-1, O-2, O-3, P, RV, NC, RVC, C-1, C-2, C-3, OCR-1, OCR-2, P-I, I-1, and I-2.

   F.   Perimeter Yard

   The perimeter yard standard is based on whether the proposed use is nonresidential or residential (Sections 6.3.3.D or .H, respectively) and the use’s adjacency to a nonresidential or residential zone (Sections 6.3.3.E or .I, respectively).

   G.   Residential Density

   The maximum permitted number of residential dwelling units per lot or size. For example:

      1/7,000 sf means that no more than one dwelling unit per 7,000 square feet is permitted.

      36/acre means that no more than 36 dwelling units per acre are permitted.

   H.   Residential Use

   For the purposes of determining the applicable dimensional standards, the following uses as defined in Section 11.3.7 are considered residential uses:

      1.   Duplex;

      2.   Manufactured Housing;

      3.   Mobile Home Dwelling;

      4.   Residential Care Service uses located or locating in an existing residential use as defined by this section;

      5.   Single-Family Dwelling, Attached;

      6.   Single-Family Dwelling, Detached; and,

      7.   Single-Family Dwellings that meet the nonconforming group dwelling criteria in accordance with Section 4.9.7.B.9.

   I.   Residential Zone

   For the purposes of determining the applicable perimeter yard standard, the following are considered residential zones : OS, IR, RH, SR, SH, RX-1, RX-2, R-1, R-2, R-3, MH-1, MH-2, MU, PAD, and PCD.

   J.   Single-family (SF) Use

   The same uses as provided in Section 6.3.3.H, Residential Use.