TABLE 6.3-5.A: DIMENSIONAL STANDARDS FOR THE P-I, I-1, & I-2 ZONES

Note: Several variables factor into determining a use’s required dimensional standards. See Section 6.3.2, Determining a Use’s Dimensional Standards, for further details.

Dimensional Standard	Zone
	P-I	I-1	I-2
Residential Density (maximum)	N/A	N/A	1 unit for a caretaker
Lot Size /Site Area (minimum)	0	0	0
Lot Coverage (maximum)	N/A	N/A	N/A
Height (maximum)	50'	75'	140'
Perimeter Yard [Standard based on the proposed use’s adjacency to a residential or nonresidential zone or street ]
Street	Section 6.4.5.C	Section 6.4.5.C	Section 6.4.5.C
Res Use Res Zone	1½(H)	2(H)	2(H)
Res Use Nonres Zone	0	0	0
Nonres Use Res Zone	1½(H)	1½(H)	2(H)
Nonres Use Nonres Zone	0	0	0

 

Key:

(H) = Height of the proposed exterior building wall

MF = Multifamily Development (Section 6.3.3.C)

MH = Mobile Home Dwelling (Section 6.3.3.A)

MH Park = Mobile Home Park (Section 6.3.3.B)

N/A = Not Applicable

Nonres = Nonresidential (Section 6.3.3.D or .E, whichever is applicable)

Res = Residential (Section 6.3.3.H or .I, whichever is applicable)

SF = Single-family Use (Section 6.3.3.J)

sf = square feet

= adjacent to