The streets shall be graded to the grades and dimensions shown on plans and profiles approved by the Plan Commission and shall include the following improvements:
A. Suitable drainage structures, culverts, storm sewers, ditches, and related installations shall be provided to insure adequate drainage of all points along the streets.
B. Curbs of concrete shall be required on all streets.
C. Pavement shall be required on all residential streets and shall be of a material and thickness as follows: eight inches (8") of compacted aggregate material, two inches (2") of binder course, and one inch (1") of final coat. All commercial and industrial development streets shall be designed to meet the anticipated traffic loads and in accordance with the Indiana State Highway Codes and design standards.
D. There shall be soil compaction tests performed at a minimum of every six hundred (600) feet. The soil boring requirement may be waived if the Town is adequately notified and performs inspections prior to the installation of the following:
1. Base material.
2. Binder course.
3. Surface final coat.
4. Sanitary Sewers.
5. Storm Sewers.
6. Water Mains.
7. Sanitary, storm and water services.
8. Sidewalks.
E. Street shoulders shall be constructed which are uniformly and thoroughly compacted by rolling and level with the tops of curbs.
(Ord. No. 1095, § VI-3, 12-14-88)