5807.3.2 Containers.

Containers designed for use in metal hydride hydrogen storage systems shall be designed to be filled, refilled or emptied of metal hydride only by the original equipment manufacturer or a trained and knowledgeable supplier, constructed in accordance with FC 5303.1, and marked in accordance with FC 5807.3.3.

5807.3.3 Marking and labeling.

Metal hydride hydrogen storage systems shall be marked and labeled in accordance with FC 5303.2, and FC 5807.3.3.1 through 5807.3.3.4.

5807.3.3.1 System markings.

Metal hydride hydrogen storage systems shall be marked with the following:

   1.   Manufacturer's name;

   2.   Manufacturer's emergency contact information;

   3.   A unique code or serial number specific to the system;

   4.   System name or product code that identifies the system by the type of chemistry used in the system;

   5.   Limitations on refilling of containers that include rated charging pressure and capacity; and

   6.   Service life indicating the last date the metal hydride hydrogen storage system can be used.

5807.3.3.2 Valve markings.

Metal hydride hydrogen storage system valves shall be marked with the following information:

   1.   Manufacturer's name;

   2.   The type of metal hydride hydrogen storage system with which the valve is compatible; and

   3.   Service life indicating the last date the valve can be used.

5807.3.3.3 Pressure relief device markings.

Metal hydride hydrogen storage system pressure relief devices shall be marked with the following information (markings for pressure relief devices integral to a valve may be made on the valve):

   1.   Manufacturer's name;

   2.   The type of metal hydride hydrogen storage system with which the device is compatible; and

   3.   Activation parameters that include temperature and/or pressure.

5807.3.3.4 Container markings.

Containers used in metal hydride hydrogen storage systems shall be marked with the following information:

   1.   Manufacturer's name;

   2.   Standard to which the container was designed and constructed;

   3.   Date of manufacturer's initial inspection and testing;

   4.   Individual serial number;

   5.   The type of metal hydride hydrogen storage system; and

   6.   Service life identifying the last date the container can be used.

5807.3.4 Physical protection.

Metal hydride hydrogen storage systems installed on powered industrial trucks shall be designed and installed in compliance with the requirements of this section.