Loading...
No person shall start an open fire any place on the airport without permission of the city fire chief. No torch cutting or welding shall be permitted in hangars. Welding in shop areas is permitted provided all safety precautions are observed and welding equipment is operated by experienced and qualified personnel.
(Res. No. 149 75-76 (part))
Good housekeeping will be required at all times by tenants and occupants of all buildings and hangars both in their assigned areas and during aircraft maintenance operations. Hangar floors shall be maintained clear of all engine stands, ladders and equipment not in actual use. Areas surrounding fire hydrants, fire extinguishers and sprinkler risers shall be kept clear at all times, and all premises shall be kept clean and clear of all rubbish, junk, debris, old aircraft and vehicles, and any other unsightly objects. If after warning by the manager, the area is not cleaned, cleaning will be done at the direction of the manager and billed to the tenant or occupant.
(Res. No. 149 75-76 (part))
No person shall store flammable material or equipment, use flammable liquids or gases, or maintain his premises in such a condition as to violate the fire prevention code of the city or any rules or regulations herein contained. Flammable liquids having a flashpoint below 100 degrees Fahrenheit shall at all times be kept in and used from approved safety cans and stored in acceptable metal cabinets, in quantity not to exceed 25 gallons. Transfer of flammable liquids from original containers to safety cans shall be done outside of buildings in a safe location. Areas surrounding storage of flammables shall be kept clear of all flammable and combustible material.
(Res. No. 149 75-76 (part))
Tenants of all hangars and buildings shall provide suitable fire extinguishers and equipment which shall be kept in good working order as determined by the fire chief and not tampered with or used for any purpose other than fire fighting or fire prevention. Extinguishers shall be inspected at least every six months by qualified personnel. Tags showing the date of the last such inspection shall be left attached to each unit.
(Res. No. 149 75-76 (part))
Loading...