An application for a permit required by this chapter which authorizes work on a building, structure, building service equipment or sign located on any lot or parcel within a special flood hazard area as defined in the floodplain regulations adopted by this title, and the plans and specifications accompanying such application, shall include the following additional information:
A. The elevation, in relation to mean sea level, of such lot or parcel and the location and elevation of any existing or new building, structure, building service equipment or sign constructed or installed, or to be constructed or installed on the lot or parcel;
B. The elevation, in relation to mean sea level, of the lowest floor and any basement of all existing or new buildings constructed or to be constructed on such lot or parcel, and the elevation of the highest grade adjacent to any such building located within a “Zone AO” as depicted on the Flood Insurance Rate Map maintained by the building official in the manner required by such floodplain regulations;
C. The elevation, in relation to mean sea level, to which any building or structure is required to be floodproofed as part of the floodplain standards adopted by or pursuant to such floodplain regulations; and
D. A description of the extent to which any watercourse will be altered or relocated as a result of such work.
E. Identification of each other permit which is required to be obtained from any other local, state or federal agency prior to the commencement of the work in the special flood hazard areas which are the subject of the permit required by this chapter.
(Ord. 2131 §1, Ord. 2370 §1)