2-5(D)   NON-RESIDENTIAL - GENERAL MANUFACTURING ZONE DISTRICT (NR-GM)

2-5(D)(1)   Purpose

The purpose of the NR-GM zone district is to accommodate a wide variety of industrial, manufacturing, and heavy commercial uses, particularly those with noise, glare, or heavy traffic impacts, in areas separated from Residential and Mixed-use areas and less intense, lighter impact businesses. Allowable uses are shown in Table 4-2-1.

2-5(D)(2)   Use and Development Standards

Table 2-5-7: NR-GM Zone District Dimensional Standards Summary				Table 2-5-8: Other Applicable IDO Sections
See Table 5-1-3 for complete Dimensional Standards				Overlay Zones	Part 14-16-3
Site Standards				Allowable Uses	14-16-4-2
A	Lot width, minimum	N/A		Use-specific Standards	14-16-4-3
B	Building coverage, maximum	N/A		Dimensional Standards	14-16-5-1
				Site Design and Sensitive Lands	14-16-5-2
Setback Standards				Access and Connectivity	14-16-5-3
C	Front, minimum	5 ft.		Subdivision of Land	14-16-5-4
D	Side, minimum	0 ft.		Parking and Loading	14-16-5-5
E	Rear, minimum	0 ft.		Landscaping, Buffering, and Screening	14-16-5-6
Building Height				Walls and Fences	14-16-5-7
F	Building height, maximum	65 ft.		Outdoor and Site Lighting	14-16-5-8
		>100 ft. from front lot line: N/A		Neighborhood Edges	14-16-5-9
				Solar Access	14-16-5-10
				Building Design	14-16-5-11
				Signs	14-16-5-12
				Operation and Maintenance	14-16-5-13

 

2-5(D)(3)   District Standards

None.