§ 160.042 DISTRICT F-1, OUTDOOR INDUSTRIAL.
   (A)   Purpose. District F-1 is intended to provide for light industrial uses which are predominately operated outdoors. Because of the potential visual and noise impacts of the uses permitted in this district, additional buffering may be required for protection of adjacent areas.
   (B)   Principal uses.
      (1)   Any use permitted in the F (Light Industrial) District subject to the regulations of District F-1;
      (2)   Motor freight terminals;
      (3)   Trucking terminals;
      (4)   Railway freight terminals;
      (5)   Outdoor storage of sand, gravel, rock or earth;
      (6)   Outdoor storage of industrial equipment or supplies; and
      (7)   Sales, rental and storage of heavy load vehicles, tractor trailers, cranes, bulldozers or similar equipment.
   (C)   Accessory uses.
      (1)   Paved automobile parking lots incidental to the principal use;
      (2)   Other uses which are subordinate to and incidental to the principal uses;
      (3)   Signs advertising services provided on the same premises; and
      (4)   Office space used in conjunction with a principal use.
   (D)   Area and height regulations.
Maximum height
50 feet
Maximum lot coverage by structures, driveways and parking
95%
Maximum lot coverage by structures
95%
Minimum distance between detached structures
30 feet
Minimum front yard
30 feet
Minimum lot area
20,000 square feet
Minimum lot depth
150 feet
Minimum lot width
80 feet
Minimum rear yard
30 feet
Minimum side yard
None
   If adjacent to any district zoned for residential uses
30 feet
   If adjacent to street
30 feet
 
   (E)   Parking requirements. Off-street parking in this district shall be provided in accordance with § 160.081 of this chapter.
   (F)   Screening requirements. Screening in accordance with § 160.084 of this chapter is required along side and rear lot lines when these lot lines are adjacent to any district zoned for residential uses.
   (G)   Landscape requirements. See § 160.088 of this chapter.
   (H)   Building regulations. Each exterior facade elevation for all floors shall consist of a minimum of 80% brick, stone or masonry, exclusive of doors, windows and window walls, unless otherwise approved by the Planning Board (reference § 160.087 of this chapter).
(1998 Code, App. A, § 40-40) (Ord. 08-43, passed 12-3-2008)