§ 159.196 PERMISSIVE USES.

   A building or premises shall be permitted to be used for the following purposes in the I-2 general industrial district: any permissive use listed in the I-1 light industrial district.

(1992 Code, App. C, § 12.02) (Ord. 20-02, passed 3-18-2002)

§ 159.197 PERMITTED SPECIAL USES.

   A building or premises may be used for the following purposes in the I-2 general industrial district in conformance with the conditions prescribed herein, or by obtaining a conditional use permit for that use in conformance with the requirements of §§ 159.390 through 159.399:

   (a)   Warehousing, wholesale trade, repair services, light manufacturing provided:

      (1)   For outside storage areas, a screening plan shall be submitted for staff approval;

      (2)   There is no storage of a regulated substance on the premises; and

      (3)   The building contains 25,000 square feet of area or less.

   (b)   Off-premises signs in conformance with §§ 159.350 through 159.355;

   (c)   Telecommunications tower, subject to:

      (1)   A minimum distance of 300 feet from the telecommunications tower to any residentially zoned or used property measured from the base of the telecommunications tower to the property line;

      (2)   A minimum distance of one-half mile between telecommunications towers measured from the base of one telecommunications tower to the base of another; and

      (3)   Stealth design approved by the county planning director.

   (d)   Retailing as an accessory use when in conjunction with a primary use of wholesaling or manufacturing.

(1992 Code, App. C, § 12.03) (Ord. 20-02, passed 3-18-2002)

§ 159.198 CONDITIONAL USES.

   A building or premises may be used for the following purposes in the I-2 general industrial district if a conditional use permit for that use has been obtained in conformance with the requirements of §§ 159.390 through 159.399:

   (a)   General manufacturing;

   (b)   Stockyards/slaughtering of animals;

   (c)   Rendering;

   (d)   Distillation of products;

   (e)   Refining;

   (f)   Sanitary landfill, solid waste receiving station;

   (g)   Paper manufacturing;

   (h)   Tank farm; petroleum products terminal;

   (i)   Salvage operation in accordance with § 159.292;

   (j)   Airport/heliport;

   (k)   Any conditional use listed in the I-1 light industrial district;

   (l)   Mineral exploration and development in accordance with § 159.289;

   (m)   Any similar use not heretofore specified;

   (n)   Broadcast tower; and

   (o)   Solar energy conversion system.

(1992 Code, App. C, § 12.04) (Ord. 20-02, passed 3-18-2002; Ord. 76-09, passed 8-17-2009; Ord. 37-14, passed 6-24-2014)

§ 159.199 ACCESSORY USES.

   Accessory uses and buildings permitted in the I-2 general industrial district are accessory buildings and uses customarily incident to any permitted uses in this district.

(1992 Code, App. C, § 12.05) (Ord. 20-02, passed 3-18-2002)

§ 159.200 PARKING REGULATIONS.

   Parking within the I-2 general industrial district shall be regulated in conformance with the provisions of §§ 159.315 through 159.319.

(1992 Code, App. C, § 12.06) (Ord. 20-02, passed 3-18-2002)

§ 159.201 SIGN REGULATIONS.

   Signs within the I-2 general industrial district shall be regulated in conformance with the provisions of §§ 159.330 through 159.338.

(1992 Code, App. C, § 12.07) (Ord. 20-02, passed 3-18-2002)

§ 159.202 DENSITY, AREA, YARD AND HEIGHT REGULATIONS.

   The maximum height and minimum lot requirements within the I-2 general industrial district shall be as follows; general requirements.

	All Uses
Density	—
Front yard	30 ft.
Lot area	—
Lot width	—
Maximum height	35 ft.
	All Uses
Rear yard	20 ft.
Side yard	10 ft.

 

(1992 Code, App. C, § 12.08) (Ord. 20-02, passed 3-18-2002)