§ 159.195 INTENT.

   This district is intended to provide for heavy industrial uses which may create some nuisance and which are not properly associated with, nor compatible with residential, office, institutional or planned or neighborhood commercial establishments. All uses in this district shall comply with any state regulations regarding noise, emissions, dust, odor, glare, vibration or heat when applicable.

(1992 Code, App. C, § 12.01) (Ord. 20-02, passed 3-18-2002)

§ 159.196 PERMISSIVE USES.

   A building or premises shall be permitted to be used for the following purposes in the I-2 general industrial district: any permissive use listed in the I-1 light industrial district.

(1992 Code, App. C, § 12.02) (Ord. 20-02, passed 3-18-2002)

§ 159.197 PERMITTED SPECIAL USES.

   A building or premises may be used for the following purposes in the I-2 general industrial district in conformance with the conditions prescribed herein, or by obtaining a conditional use permit for that use in conformance with the requirements of §§ 159.390 through 159.399:

   (a)   Warehousing, wholesale trade, repair services, light manufacturing provided:

      (1)   For outside storage areas, a screening plan shall be submitted for staff approval;

      (2)   There is no storage of a regulated substance on the premises; and

      (3)   The building contains 25,000 square feet of area or less.

   (b)   Off-premises signs in conformance with §§ 159.350 through 159.355;

   (c)   Telecommunications tower, subject to:

      (1)   A minimum distance of 300 feet from the telecommunications tower to any residentially zoned or used property measured from the base of the telecommunications tower to the property line;

      (2)   A minimum distance of one-half mile between telecommunications towers measured from the base of one telecommunications tower to the base of another; and

      (3)   Stealth design approved by the county planning director.

   (d)   Retailing as an accessory use when in conjunction with a primary use of wholesaling or manufacturing.

(1992 Code, App. C, § 12.03) (Ord. 20-02, passed 3-18-2002)

§ 159.198 CONDITIONAL USES.

   A building or premises may be used for the following purposes in the I-2 general industrial district if a conditional use permit for that use has been obtained in conformance with the requirements of §§ 159.390 through 159.399:

   (a)   General manufacturing;

   (b)   Stockyards/slaughtering of animals;

   (c)   Rendering;

   (d)   Distillation of products;

   (e)   Refining;

   (f)   Sanitary landfill, solid waste receiving station;

   (g)   Paper manufacturing;

   (h)   Tank farm; petroleum products terminal;

   (i)   Salvage operation in accordance with § 159.292;

   (j)   Airport/heliport;

   (k)   Any conditional use listed in the I-1 light industrial district;

   (l)   Mineral exploration and development in accordance with § 159.289;

   (m)   Any similar use not heretofore specified;

   (n)   Broadcast tower; and

   (o)   Solar energy conversion system.

(1992 Code, App. C, § 12.04) (Ord. 20-02, passed 3-18-2002; Ord. 76-09, passed 8-17-2009; Ord. 37-14, passed 6-24-2014)

§ 159.199 ACCESSORY USES.

   Accessory uses and buildings permitted in the I-2 general industrial district are accessory buildings and uses customarily incident to any permitted uses in this district.

(1992 Code, App. C, § 12.05) (Ord. 20-02, passed 3-18-2002)

§ 159.200 PARKING REGULATIONS.

   Parking within the I-2 general industrial district shall be regulated in conformance with the provisions of §§ 159.315 through 159.319.

(1992 Code, App. C, § 12.06) (Ord. 20-02, passed 3-18-2002)

§ 159.201 SIGN REGULATIONS.

   Signs within the I-2 general industrial district shall be regulated in conformance with the provisions of §§ 159.330 through 159.338.

(1992 Code, App. C, § 12.07) (Ord. 20-02, passed 3-18-2002)

§ 159.202 DENSITY, AREA, YARD AND HEIGHT REGULATIONS.

   The maximum height and minimum lot requirements within the I-2 general industrial district shall be as follows; general requirements.

	All Uses
Density	—
Front yard	30 ft.
Lot area	—
Lot width	—
Maximum height	35 ft.
	All Uses
Rear yard	20 ft.
Side yard	10 ft.

 

(1992 Code, App. C, § 12.08) (Ord. 20-02, passed 3-18-2002)