§ 159.180 PARKING REGULATIONS.

   Parking within the I-1 light industrial district shall be regulated in conformance with the provisions of §§ 159.315 through 159.319.

(1992 Code, App. C, § 11.06) (Ord. 20-02, passed 3-18-2002)

§ 159.181 SIGN REGULATIONS.

   Signs within the I-1 light industrial district shall be regulated in conformance with the provisions of §§ 159.330 through 159.338.

(1992 Code, App. C, § 11.07) (Ord. 20-02, passed 3-18-2002)

§ 159.182 DENSITY, AREA, YARD AND HEIGHT REGULATIONS.

   The maximum height and minimum lot requirements within the I-1 light industrial district shall be as follows.

   (a)   General requirements.

	All Uses
Density	—
Front yard	30 ft.
Lot area	—
Lot width	—
Maximum height	45 ft.
Rear yard	20 ft.
Side yard	10 ft.

 

   (b)   There shall be a required front yard on each street side of a double frontage lot.

   (c)   There shall be a required front yard on each street side of a corner lot.

(1992 Code, App. C, § 11.08) (Ord. 20-02, passed 3-18-2002)

I-2 GENERAL INDUSTRIAL DISTRICT

§ 159.195 INTENT.

   This district is intended to provide for heavy industrial uses which may create some nuisance and which are not properly associated with, nor compatible with residential, office, institutional or planned or neighborhood commercial establishments. All uses in this district shall comply with any state regulations regarding noise, emissions, dust, odor, glare, vibration or heat when applicable.

(1992 Code, App. C, § 12.01) (Ord. 20-02, passed 3-18-2002)

§ 159.196 PERMISSIVE USES.

   A building or premises shall be permitted to be used for the following purposes in the I-2 general industrial district: any permissive use listed in the I-1 light industrial district.

(1992 Code, App. C, § 12.02) (Ord. 20-02, passed 3-18-2002)

§ 159.197 PERMITTED SPECIAL USES.

   A building or premises may be used for the following purposes in the I-2 general industrial district in conformance with the conditions prescribed herein, or by obtaining a conditional use permit for that use in conformance with the requirements of §§ 159.390 through 159.399:

   (a)   Warehousing, wholesale trade, repair services, light manufacturing provided:

      (1)   For outside storage areas, a screening plan shall be submitted for staff approval;

      (2)   There is no storage of a regulated substance on the premises; and

      (3)   The building contains 25,000 square feet of area or less.

   (b)   Off-premises signs in conformance with §§ 159.350 through 159.355;

   (c)   Telecommunications tower, subject to:

      (1)   A minimum distance of 300 feet from the telecommunications tower to any residentially zoned or used property measured from the base of the telecommunications tower to the property line;

      (2)   A minimum distance of one-half mile between telecommunications towers measured from the base of one telecommunications tower to the base of another; and

      (3)   Stealth design approved by the county planning director.

   (d)   Retailing as an accessory use when in conjunction with a primary use of wholesaling or manufacturing.

(1992 Code, App. C, § 12.03) (Ord. 20-02, passed 3-18-2002)