§ 157.131 PUBLIC WATER SUPPLY.

   Land which is located over or adjacent to a water bearing stratum or water supply reservoir and which is designated as an area providing or supplementing a municipal water supply shall not be developed or subdivided for residential, recreational, commercial or industrial purposes except when public water and sewer systems are provided.

(1992 Code, App. A, § 15A.09.020) (Ord. 81-08, passed 7-7-2008)

§ 157.132 DESIGN STANDARDS.

   All water facilities including water mains, valves, fire hydrants, storage facilities and pumping stations shall be designed in accordance with engineering design standards and are subject to the approval of the city engineer. All water facilities shall be designed in compliance with the engineering design standards.

(1992 Code, App. A, § 15A.09.030) (Ord. 81-08, passed 7-7-2008)

SANITARY SEWERS

§ 157.145 PROVIDED FOR EACH LOT.

   Each lot within a subdivision area shall be provided with a connection to an approved public sanitary sewer.

(1992 Code, App. A, § 15A.10.010) (Ord. 81-08, passed 7-7-2008)

§ 157.146 EXCEPTIONS.

   (a)   In areas where a public sanitary sewer is not reasonably accessible, but where plans, including the comprehensive plan, a facilities plan or any other approved plan for the installation of sanitary sewers in the vicinity of the subdivision has been prepared, the subdivider shall install sewers in conformity to plans approved by the city engineer.

   (b)   In cases where a connection to an existing public sanitary sewer may not be immediately practical, a connection may be made to the gravity sewer system by the use of a lift station, constructed in accordance with the regulations and requirement set forth by the city engineer.

(1992 Code, App. A, § 15A.10.020) (Ord. 81-08, passed 7-7-2008)

§ 157.147 DESIGN STANDARDS.

   (a)   All sanitary sewer facilities including gravity sewers, manholes, lift stations and force mains shall be designed in accordance with standard accepted engineering practice and are subject to the approval of the city engineer.

   (b)   All sewer facilities shall be designed in compliance with the engineering design standards.

(1992 Code, App. A, § 15A.10.030) (Ord. 81-08, passed 7-7-2008)

GRADING AND DRAINAGE

§ 157.160 GRADING PLAN.

   The final grading plan for the subdivision shall be submitted to and approved by the city engineer. The grading plan shall, as much as possible, be laid out to conform to the natural contour of the land.

(1992 Code, App. A, § 15A.11.010) (Ord. 81-08, passed 7-7-2008)