CHAPTER 1234: PARKING, ACCESS, AND MOBILITY STANDARDS

Section

1234.01 Purpose

1234.02 Off-street parking required

1234.03 Minimum parking space and driveway aisle standards

1234.04 Accessible spaces for automobiles and vans

1234.05 Access

1234.06 Setback requirements

1234.07 Prohibited activities

1234.08 Units of measurement

1234.09 Change in use, additions, and enlargements

1234.10 Mixed occupancies and shared parking

1234.11 Uses not specified

1234.12 Not to exceed requirement and reduced parking

1234.13 Deferred construction of parking spaces

1234.14 Number of parking spaces required

1234.15 Existing parking to be maintained

1234.16 Design, development, and maintenance of parking areas

1234.17 Bicycle and e-scooter parking

1234.18 Drive-in and drive-through circulation and off-street waiting spaces

1234.19 Off-street loading space

1234.20 Maintenance

1234.21 Sidewalks and sidewalk connections to a right-of-way

1234.22 Traffic impact analysis

§ 1234.01 PURPOSE.

   (a)   It is the purpose of the off-street parking and loading regulations to reduce the congestion on streets due to excessive use for parking and loading of motor vehicles and to prevent excessive amounts of off-street parking and loading through the appropriate control of the siting and number of spaces permitted.

   (b)   Off-street circulation regulations are designed to prevent traffic congestion and hazard due to the movement of vehicles and pedestrians on private property.

   (c)   The requirements apply uniformly to all buildings and uses, regardless of the districts in which they are located.

(Ord. 21-161, passed 12-13-2021)

§ 1234.02 OFF-STREET PARKING REQUIRED.

   Off-street parking and/or loading shall be provided for every new, enlarged or modified use in connection with every use as applicable in this code, in accordance with the requirements specified in this chapter.

(Ord. 21-161, passed 12-13-2021)

§ 1234.03 MINIMUM PARKING SPACE AND DRIVEWAY AISLE STANDARDS.

   The following minimum standards shall apply to all parking spaces and driveway aisles.

   (a)   Parking space standard width and length. Parking spaces shall have the following minimum dimensions, exclusive of circulation aisles:

 

Table 1234-1: Parking Space Dimensional Requirements
Dimension (Feet)	0 Degree Parallel	30 Degrees Diagonal	45 Degrees Diagonal	60 Degrees Diagonal	90 Degrees Perpendicular
Space width	8	8.5	8.5	9	9
Space length	22	18	18	18	18

 

   (b)   Circulation aisles. Circulation aisles shall have the minimum dimensions as set forth in Table 1234-1 based on whether the drive aisle has only one-way or two-way traffic. Where there is a combination of two different parking angles, the widest aisle width shall be required.

 

Table 1234-2: Circulation Aisle Dimensional Requirements
Dimension (feet)	0 degree Parallel	30 degrees Diagonal	45 degrees Diagonal	60 degrees Diagonal	90 degrees Perpendicular
One-way	12	14	15	15	24
Two-way	24	24	24	24	24

 

(Ord. 21-161, passed 12-13-2021)