Loading...
A building envelope shall be determined for every buildable lot in RR-2 and RR-3 Districts. The use of building envelopes is in lieu of building setback lines in order to achieve greater flexibility in house placement to protect natural features and views. The determination of the building envelope shall include the following considerations:
(a) Building envelopes should be selected that do not include the tops of ridge lines. (See Figure 5 following the text of this chapter.)
(b) Building envelopes should avoid open fields. (See Figure 5 following the text of this chapter.)
(c) Building envelopes should be located on the edges of fields and in wooded areas to minimize the visual impact of development. (See Figure 5 following the text of this chapter.)
(d) Building envelopes shall not include wetlands and flood plains.
(e) Building envelopes shall not include areas with slopes in excess of thirty-five percent. (See Figure 5 following the text of this chapter.)
(f) Septic systems, sewers, water lines, wells and driveways may be located outside building envelopes.
(g) Building envelopes shall be indicated on the subdivision sketch plan and preliminary plat. Final locations of the building envelope shall be shown on the record plat, including dimensioning to clearly define the limitations.
(Ord. 95-150. Passed 10-3-95.)
In RR-2 and RR-3 Districts, existing vegetation should be preserved in areas where disturbance is not necessary outside the building envelope.
(a) Lawn areas should be minimized in wooded areas.
(b) Where building envelopes are located in woodlands, a treed area of at least forty feet between the building envelope and the common drive or roadway shall be retained. (See Figure 6 following the text of this chapter.)
(Ord. 95-150. Passed 10-3-95; Ord. 15-11. Passed 1-20-15.)
In RR-2 and RR-3 Districts, permanent on-site development identification signs are discouraged.
(a) Where the Planning Commission determines that a development identification sign is appropriate, its area shall be limited to ten square feet, its construction shall be of natural materials (i.e. wood and stone), and the base area shall be appropriately landscaped.
(b) Resident identification signs are permitted at entrances to driveways. The maximum height of resident identification signs shall be eight feet. Each individual name sign shall not be more than one square foot. (See Figure 8 following the text of this chapter.)
(Ord. 95-150. Passed 10-3-95.)
Deed restricted lands shall be indicated on the record plat, including dimensioning, to clearly define the restricted areas.
(Ord. 95-150. Passed 10-3-95.)
TABLE 1 SCHEDULE OF AREA, YARD AND HEIGHT REGULATIONS RR-V DISTRICT | ||||
Density Per Acre | Dwelling Type | Lot Area | Lot Width | |
RR-V | 1 | 1 familty | 7,000 sq. ft. | 60 ft. |
Build-To lines | Measured From | Side Setback Line | Rear Setback Line | |
RR-V | 20 ft. | ROW | 8 ft. | Garage 20 ft. |
Home 40 ft. |
TABLE 2 SCHEDULE OF AREA, YARD AND HEIGHT REGULATIONS RR-2 AND RR-3 DISTRICTS) | ||||||
Density Per Acre | Dwelling Type | Minimum Lot Area | Minimum Lot Width | Minimum Building Envelope | Maximum Total Lot Disturbance |
TABLE 2 SCHEDULE OF AREA, YARD AND HEIGHT REGULATIONS RR-2 AND RR-3 DISTRICTS) | ||||||
Density Per Acre | Dwelling Type | Minimum Lot Area | Minimum Lot Width | Minimum Building Envelope | Maximum Total Lot Disturbance | |
RR-2 | .5 | 1 family | 31,250 sq. ft | 125 | 20% | 40% |
RR-3 | .33 | 1 family | 45,000 sq. ft. | 150 | 15% | 30% |
Minimum Building Envelope Setback1 | Measured From | Minimum Setback of Building Envelope | Minimum Building Envelope From From Side Lot Line2 | Maximum Height Main Building Rear Lot Line3 (stories) | ||
RR-2 | 40 ft. | ROW | 20 ft. | 40 ft. | 2 | |
RR-3 | 70 ft | ROW | 30 ft. | 75 ft. | 2 | |
1 The Planning Commission may approve building envelope setbacks less than what is required here if the lesser setback will better preserve natural features and protect views.
2. Ibid.
3. Ibid.
(Ord. 95-150. Passed 10-3-95.)
FIGURES 1 THROUGH 8