The form of the final map shall comply with the subdivision map act and as follows:
A. Drawing and Reproduction of Final Map. The final map shall be legibly drawn, printed, or reproduced by a process guaranteeing a permanent record in black on polyester base film. Certificates, affidavits, and acknowledgments may be legibly stamped or printed upon the map with opaque indelible ink. If ink is used on polyester base film, the ink surface shall be coated with a suitable substance to ensure permanent legibility;
B. Sheet Size. The size of each sheet shall be twenty-two (22) inches by thirty (30) inches. A marginal line shall be drawn completely around each sheet, leaving an entirely blank margin of one inch;
C. Map Scale. The scale of the map shall be an engineering scale and not less than one inch equals fifty (50) feet or as may be necessary to show all details clearly, and enough sheets shall be used to accomplish this end;
D. Number of Sheets. The particular number of the sheet and the total number of sheets comprising the map shall be stated on each of the sheets, and its relation to each adjoining sheet shall be clearly shown. When four or more sheets including the certificate sheet are used, a key sheet shall be included;
E. Map lettering. All printing or lettering on the map shall be of one-eighth (1/8) inch minimum height by hand. or one-tenth (1/10) inch by machine, and of a shape and weight as to be readily legible on prints and other reproductions made from the original drawings; and
F. State Law Compliance. The final form of the final map shall be in compliance with state law (Government Code Section 66434) and as approved by the city engineer.
(Ord. 182 § 2 (part), 1997)