Skip to code content (skip section selection)
Compare to:
Toledo Overview
Toledo Municipal Code
TOLEDO MUNICIPAL CODE
CERTIFICATION
ADOPTING ORDINANCE
EDITOR'S NOTE
COMPARATIVE SECTION TABLE
CHARTER OF THE CITY OF TOLEDO, OHIO
PART ONE - ADMINISTRATIVE CODE
PART THREE - TRAFFIC CODE
PART FIVE - GENERAL OFFENSES CODE
PART SEVEN - BUSINESS REGULATION CODE
PART NINE - STREETS, UTILITIES AND PUBLIC SERVICES CODE
PART ELEVEN - PLANNING AND ZONING CODE
PART TWELVE - DEVELOPMENT CODE
PART THIRTEEN - BUILDING CODE
PART FIFTEEN - FIRE PREVENTION CODE
PART SEVENTEEN - HEALTH CODE
PART NINETEEN - TAXATION CODE
PART TWENTY-ONE - PERSONNEL RELATIONS AND MUNICIPAL EMPLOYMENT
Loading...
1106.0602 Residential Component.
   A minimum of 50 percent of the floor area of any new buildings over 25,000 square feet constructed in the CM District after June 6, 2004, must be devoted to residential dwelling units.
(Ord. 170-04. Passed 3-23-04.)
1106.0700 Planned Business/Industrial Park District additional standards.
   In addition to the intensity and dimensional standards of Chapter 1106.
(Ord. 170-04. Passed 3-23-04.)
1106.0701 Subdivision Plat Approval Required.
   Requests to rezone property to the IP District under the rezoning procedure of Section 1111.0600 must be processed concurrently with an application for subdivision plat approval. The proposed subdivision plat must be accompanied by a landscape plan pursuant to Section 1108.0500.
(Ord. 170-04. Passed 3-23-04.)
1106.0702 Architectural Review Committee.
   The owners/developers of the property must form an Architectural Committee for the industrial/business park property. At least one member of the Architectural Committee must be a licensed architect. The Architectural Committee must prepare a plan and design guidelines for development within the IF District and review proposed building plans with the district for compliance with those plans and guidelines. Documents establishing the Architectural Committee and proposed design plans and guidelines must be approved as part of the subdivision approval process.
(Ord. 170-04. Passed 3-23-04.)
1106.0800 Parks and Open Space District intensity and dimensional standards.
   The following intensity and dimensional standards apply in the POS District.
(Ord. 170-04. Passed 3-23-04.)
1106.0801 Maximum Building Height.
35 feet.
(Ord. 170-04. Passed 3-23-04.)
1106.0802 Minimum Required Setbacks.
   A.   Buildings and off-street parking areas must be set back at least 25 feet from all street and place rights-of-way.
   B.   Buildings and off-street parking areas must be set back at least 20 feet from side and rear lot lines that abut RS or RD Districts; otherwise, the minimum building and parking area setback from side and rear lot lines is 10 feet.
   C.   Any playground, sport court or other active recreation area must be set back at least 50 feet from any RS or RD District and at least 25 feet from any other Residential or Commercial District.
(Ord. 170-04. Passed 3-23-04.)
Loading...