1106.0100 Intensity and dimensional standards tables.
1106.0200 Measurements, computations and exceptions.
1106.0300 Multiple buildings on lot.
1106.0400 Multi-dwelling lot area bonuses and amenities in CM and CD Districts.
1106.0700 Planned Business/Industrial Park District additional standards.
1106.0800 Parks and Open Space District intensity and dimensional standards.
1106.0900 Institutional Campus District intensity and dimensional standards.
Unless otherwise expressly stated, all buildings in Residential (R) Districts must comply with the following standards, as well as all other applicable standards of this Zoning Code.
(Ord. 170-04. Passed 3-23-04; Ord. 346-10. Passed 6-22-10; Ord. 229-13. Passed 4-30-13; Ord. 533-24. Passed 10-23-24.)
Standard | RS 12 | RS 9 | RS 6 | RD 6 | RM 12 | RM 24 | RM 36 | RMH |
Standard | RS 12 | RS 9 | RS 6 | RD 6 | RM 12 | RM 24 | RM 36 | RMH |
Minimum Lot Area (sq. ft. per unit) | ||||||||
Detached House | 12,000 | 9,000 | 6,000 | 6,000 | 6,000 | 6,000 | 6,000 | NA |
Attached House | NA | NA | NA | 3,000 | 3,000 | 3,000 | 3,000 | NA |
Duplex | NA | NA | NA | 3,000 | 3,000 | 3,000 | 3,000 | NA |
Multi-Dwelling [8] | NA | NA | NA | NA | 3,600 | 1,800 | 1,200 | NA |
Manufactured Home [1] | NA | NA | NA | NA | NA | NA | NA | 3,600 |
All Other Development | 12,000 | 9,000 | 6,000 | 6,000 | 6,000 | 6,000 | 6,000 | NA |
Maximum Density (dwelling units per acre) [2] | 3 | 4 | 6 | 6 | 10 | 20 | 30 | 10 |
Minimum Lot Width (feet) | 75 | 60 | 50 | 50 | 50[3] | 50[3] | 50[3] | 40 |
Minimum Setbacks (feet) | ||||||||
Front | 35 | 30 | 25 | 25 | 25 | 25 | 25 | 25[4] |
Side (one side/combined) | 7.5/16 | 6/14[5] | 5/12[5] | 5/12[5] | 5/12[5] | 5/12[5][6] | 5/12[5][6] | 10/20 |
Rear | 35 | 30 | 25 | 25 | 25 | 25 | 25 | 12[7] |
Maximum Height (feet) | 35 | 35 | 35 | 35 | 35 | 35 | 50 | 20 |
NA = Not Applicable
Table Notes
[1] The standards apply to manufactured homes in manufactured housing parks.
[3] Minimum lot width for attached house: 25 feet.
[4] Where a lot in a manufactured housing park abuts a dedicated place, the minimum front setback is 7 feet.
[5] Combined total setbacks for attached houses, detached houses and duplexes may be reduced to 10 feet to accommodate an attached garage or carport.
[6] Minimum side setback is increased to 10 feet when adjacent to RS or RD district.
[7] Where a lot in a manufactured housing park abuts the periphery of the development, the minimum rear setback is 25 feet. No structure in a manufactured housing park may be located in the required rear setback.
[8] These density standards apply to single buildings, for multiple buildings on a lot see Max. Density Row and Table Note [2].
Loading...