(1) No person, unless licensed to manufacture firearms under federal law, shall:
(a) use a three-dimensional printer to create any firearm, or any piece or part thereof or attachment thereto;
(b) use any additive manufacturing process in order to produce a firearm; or
(c) convert an unfinished frame or receiver into a finished firearm.
(2) No person shall sell or otherwise transfer a firearm finishing device or an unfinished frame or receiver unless the transferor and transferee are both federal firearms licensees.
(3) No person shall purchase or otherwise accept transfer of a firearm finishing device or an unfinished frame or receiver unless the transferor and transferee are both federal firearms licensees.
(4) No person shall manufacture or otherwise produce a rate-of-fire acceleration device by any means, including via a three-dimensional printer or other additive manufacturing device or process. 354.2
(5) No person shall purchase or otherwise take ownership, possess, or sell or otherwise transfer a rate-of-fire acceleration device. 354.3
Notes
| 354.2 | Added, Bill No. 240472 (approved June 18, 2024). |
| 354.3 | Added, Bill No. 240472 (approved June 18, 2024). |