Loading...
The hotel combining district shall apply to properties designated on the zoning map by the symbol "H" within parentheses, following the research, office or limited manufacturing (ROLM), research park (RP), or general manufacturing (GM) designation with which it is combined.
(Ord. 5035 § 4 (part), 2009: Ord. 3890 § 14 (part), 1989)
The site development regulations of Chapter 18.20 (ROLM, RP and GM), whichever is applicable, shall apply except for the following:
(a) Floor Area Ratio. The maximum floor area ratio (FAR) for hotel use shall be 2.0 to 1 in the ROLM, RP and GM districts.
(b) Site and design review pursuant to Chapter 18.30(G) shall apply to all proposed hotel uses with a FAR in excess of 0.6 to 1.
(Ord. 5035 § 4 (part), 2009: Ord. 3890 § 14 (part), 1989)
Hotels in the CC(H) or CS(H) District shall be permitted to develop beyond the density otherwise permitted in the CC or CS District, whichever is applicable, up to a maximum 0.6 to 1 floor area ratio, only upon issuance of a conditional use permit in accord with Chapter 18.76 (Permits and Approvals), and subject to site and design review in accord with Chapter 18.30(G).
(Ord. 4826 § 89, 2004: Ord. 3890 § 14 (part), 1989)
Sections:
18.30(E).010 Specific Purposes
18.30(E).020 Applicability of Regulations
18.30(E).030 Zoning Map Designation
18.30(E).040 Use Limitations
The landscape combining district is intended to provide regulations to ensure the provision of landscaped open space as a physical and visual separation between residential districts and intensive commercial or industrial uses, and in selected locations where landscaped buffers are desirable.
(Ord. 3048 (part), 1978)
The landscape combining district may be combined with any other district established by this title, in accord with the provisions of Chapter 18.08 and Chapter 18.80. Where so combined, the provisions of this chapter shall apply in lieu of the corresponding provisions of the general district with which the landscape combining district is combined.
(Ord. 3048 (part), 1978)
The landscape combining district shall be applied only adjoining site lines or property lines, where consistent with the purposes of this chapter, and shall be designated on the zoning map by the symbol "L" within parentheses, following the general district designation for the district with which it is combined. The dimension of the landscape combining district, measured at right angles to the property line, shall be indicated on the zoning map.
(Ord. 3048 (part), 1978)
Loading...