Tableware, including dishes, utensils, and equipment must be cleaned and sanitized, as defined in 24 RCNY Health Code § 81.03, manually or by machine using either heat or chemical means, in accordance with this section, except that other adequate methods acceptable to the Department may be used.
(a) Manual washing and sanitizing. A three compartment sink must be used when washing and sanitizing equipment, dishes and utensils by hand, except where otherwise indicated in this subdivision. All compartments of the sink must be large and deep enough to permit complete immersion of the largest equipment and utensils to be washed. Items must be:
(1) Washed in the first compartment in a detergent solution;
(2) Rinsed free of such solution in clean hot water in the second compartment; and
(3) Sanitized in the third compartment with hot water or a chemical solution.
(A) Hot water sanitizing. Hot water used for sanitizing must be heated to and maintained at or above 170 degrees Fahrenheit (76.6 degrees Celsius). A numerically scaled, indicating or digital thermometer calibrated to be accurate to plus or minus 2 degrees Fahrenheit (1.1 degrees Celsius) must be used to measure water temperature. Items must be wholly immersed for at least 30 seconds to destroy surface pathogens.
(B) Chemical sanitizing. Only anti-microbial pesticides registered with the U.S. Environmental Protection Agency shall be used for manual chemical sanitizing and must be used in sufficient amounts to achieve the sanitization levels required by subdivision (ii) of 24 RCNY Health Code § 81.03, without leaving toxic residues on surfaces treated. A test kit or other device must be used to accurately measure the parts per million concentration of the solution used, and the pH of the solution when the pH level would affect the performance of the chemical sanitizer.
(C) Glassware. Glasses only may be washed in a two compartment sink using a combination detergent and sanitizer in the first compartment and rinsed in clean water in the second compartment, if the manufacturer of the combination product indicates it may be used in this manner.
(b) Mechanical washing and sanitizing.
(1) Heat requirements for mechanical washing. High temperature machines used for the cleaning and sanitizing of utensils, equipment, and food contact surfaces must be installed, maintained, and kept in working order. Machines must be equipped with thermometers, and operated so that all food contact surfaces achieve a surface temperature of at least 160 degrees Fahrenheit (71 degrees Celsius) in order to destroy surface pathogens.
(2) Chemical requirements for mechanical washing. Low temperature machines that use chemicals must be installed, maintained, kept in working order and operated so as to attain effective sanitization. A test kit or other device must be used to accurately measure the parts per million concentration of the solution used and the pH of the solution when the pH level would affect the performance of the chemical sanitizer and to ensure the chemical sanitizer is used in concentrations that will not leave toxic residues on surfaces treated.
(c) Drain boards; air drying. Drain boards of adequate size must be provided and used for the proper handling of soiled items prior to washing, and of clean items following sanitization. Drain boards must be self-draining, and located and constructed so that they do not interfere with the proper use of ware washing facilities. All tableware, utensils, and food contact equipment must be air dried after sanitizing.
(Amended City Record 7/9/2015, eff. 8/8/2015)