Loading...
The Residential Medium Lot (“RM”) zone provides for areas of the City devoted to detached single-family residential dwellings and subdivisions. The RM zone includes other complimentary principal and accessory uses by right and as special exceptions. Development standards specific to the RM zone are set forth herein. Standards generally applicable to certain uses and dimensional standards can be found in Division III, “Generally Applicable Standards”.
A. Development Standards.
RM STANDARDS | Minimum | Maximum |
RM STANDARDS | Minimum | Maximum |
Lot Size (Sq. Ft.) | 7,700 | N/A |
Lot Width (Ft.) | 55 | N/A |
Front Yard Setback (Ft.) | 20 | N/A |
Side Yard Setback (Ft.) | 10 for each side yard | N/A |
Rear Yard Setback (Ft.) | 25 | N/A |
Building Height (Ft.) | N/A | 35 |
Residential Unit Size (Sq. Ft.) | 1,100 | N/A |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 50 |
Accessory Building Location | Rear Yard, min. 8 feet from any lot line - permitted in a side yard only if there is 15 feet between the front building line/ front setback and the accessory building | |
Accessory Building Height (Ft.) | N/A | 20 |
Parking Location | Driveway or Garage | |
Signage | Division III, Sec. 10-03-08 | |
Landscaping | Division III, Sec. 10-03-06 | |
Parking | Division III, Sec. 10-03-02 | |
Design Standards | Division III, Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, § 2, 9-21-20)
The Residential Attached Single-Family (“RA”) zone provides areas of the City devoted to attached single-family homes, such as duplexes and townhomes within and complimentary to areas devoted to single-family dwellings to promote a greater mix of residential housing options. The RA Zone includes other complimentary principal and accessory uses by right and as special exceptions. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
RA STANDARDS | Minimum | Maximum |
RA STANDARDS | Minimum | Maximum |
Lot Size (Sq. Ft.) | 5,400* | N/A |
Lot Width (Ft.) | 40; 24 for units attached on both sides | N/A |
Units per Acre | N/A | 10 |
Front Yard Setback (Ft.) | 20 | N/A |
Side Yard Setback (Ft.) | 8 for each side yard; 0 between attached dwelling units | N/A |
Rear Yard Setback (Ft.) | 20 | N/A |
Building Height (Ft.) | N/A | 40 |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 60* |
Residential Unit Size (Sq. Ft.) | 900 | N/A |
Accessory Building Location | Rear Yard, min. 8 feet from any lot line - permitted in a side yard only if there is 15 feet between the front building line/front setback and the accessory building | |
Accessory Building Height (Ft.) | N/A | 20 |
Parking Location | Driveway or Garage | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
* For attached, single-family townhomes the coverage shall apply for the project as a whole, not the individual lots.
(Ord. 20-29, §2, 9-21-20; Ord. 21-44, §1, 10-4-21)
The Residential Multi-Unit Complex (“RMC”) zone provides attached single-family dwellings, and duplexes, arranged and operating as a complex. The RMC zone includes other complimentary principal and accessory uses by right and as special exceptions. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
RMC STANDARDS | Minimum | Maximum |
RMC STANDARDS | Minimum | Maximum |
Lot Size (acres) | 4 acres | N/A |
Lot Width (Ft.) | 300 | N/A |
Units per Acre | N/A | 30 |
Front Yard Setback (Ft.) | 20 | N/A |
Side Yard Setback (Ft.) | 20 for each side yard | N/A |
Rear Yard Setback (Ft.) | 20 | N/A |
Building Height (Ft.) | 30 | 80 |
Residential Unit Size (Sq. Ft.) | 700 | N/A |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 70 |
Accessory Building Location | N/A | N/A |
Accessory Building Height (Ft.) | N/A | 20 |
Parking Location | Lot, Driveway or Garage | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, § 2, 9-21-20)
The Residential Mobile Homes (“RMH”) zone provides for areas of the City developed as mobile and manufactured home parks. The RMH zone includes a number of complimentary principal and accessory uses by right and as special exceptions. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
RMH STANDARDS | Minimum | Maximum |
RMH STANDARDS | Minimum | Maximum |
Lot Size (Acres) | 5 | 10 |
Lot Width (Ft.) | N/A | N/A |
Units per Acre | N/A | 20 |
Front Yard Setback (Ft.) | 40 from any right-of-way | N/A |
Side Yard Setback (Ft.) | 40 for each side yard; 6 between individual buildings | N/A |
Rear Yard Setback (Ft.) | 25 | N/A |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | N/A |
Building Height (Ft.) | N/A | 30 |
Accessory Building Location | Rear Yard, min. 5 ft. from any lot line; permitted in a side yard only if there is 15 ft. between the front building line/front setback and the accessory building | |
Accessory Building Height (Ft.) | N/A | 15 |
Parking Location | Side Yard / Rear Yard | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, §2, 9-21-20; Ord. 21-44, §1, 10-4-21)
The Commercial Small Format (“CS”) zone provides for areas of the City devoted to small-scale businesses located in buildings that would serve more small and local businesses located along corridors surrounded by less intense residential uses. The CS zone includes a number of complimentary principal and accessory uses by right and as special exceptions. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
CS STANDARDS | Minimum | Maximum |
CS STANDARDS | Minimum | Maximum |
Lot Size (Sq. Ft.) | 5,000 | 20,000 |
Lot Width (Ft.) | N/A | N/A |
Units per Acre | N/A | N/A |
Front Yard Setback (Ft.) | 20 | 50 |
Side Yard Setback (Ft.) | 10 for each side yard; 0 internal | N/A |
Rear Yard Setback (Ft.) | 10 | N/A |
Building Height (Ft.) | N/A | 35 |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 60 |
Accessory Building Location | N/A | N/A |
Accessory Building Height (Ft.) | N/A | N/A |
Parking Location | Side Yard / Rear Yard | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, § 2, 9-21-20)
The Commercial Medium Format (“CM”) zone provides for areas of the City devoted to medium-scale businesses located in buildings that will serve small to larger-scale businesses along corridors that are interspersed with commercial and residential uses. The CM zone includes a number of complimentary principal and accessory uses by right and as special exceptions. The following table contains the list of uses that are permitted by right, or by special exception in the CM zone. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
CM STANDARDS | Minimum | Maximum |
CM STANDARDS | Minimum | Maximum |
Lot Size (Sq. Ft.) | 20,000 | 100,000 |
Lot Width (Ft.) | N/A | N/A |
Units per Acre | N/A | N/A |
Front Yard Setback (Ft.) | 20 | 80 |
Side Yard Setback (Ft.) | 20: aggregate combined both side yards | N/A |
Rear Yard Setback (Ft.) | 30 | N/A |
Building Height (Ft.) | N/A | 45 |
Residential Unit Size (Sq. Ft.) | 600 | N/A |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 70 |
Accessory Building Location | N/A | N/A |
Accessory Building Height (Ft.) | N/A | N/A |
Parking Location | Side Yard / Rear Yard | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, § 2, 9-21-20)
The Commercial Large Format (“CL”) zone provides for areas of the City devoted to large-scale commercial uses in buildings on lots generally larger than eighty thousand (80,000) square feet along major commercial corridors. These uses tend to draw customers from inside and outside the City and have convenient access and greater visibility. The CL zone includes a number of complimentary principal and accessory uses by right and as special exceptions. Standards generally applicable to certain uses and dimensional standards can be found in Division III., “Generally Applicable Standards”.
A. Development Standards.
CL STANDARDS | Minimum | Maximum |
CL STANDARDS | Minimum | Maximum |
Lot Size (Sq. Ft.) | 100,000 | N/A |
Lot Width (Ft.) | N/A | N/A |
Units per Acre | N/A | N/A |
Front Yard Setback (Ft.) | 40 | N/A |
Side Yard Setback (Ft.) | 40 for each side yard | N/A |
Rear Yard Setback (Ft.) | 40 | N/A |
Building Height (Ft.) | N/A | 60 |
Residential Unit Size (Sq. Ft.) | 600 | N/A |
Impervious Lot Coverage (Maximum Percentage of Total Lot Area) | N/A | 80 |
Accessory Building Location | N/A | N/A |
Accessory Building Height (Ft.) | N/A | N/A |
Parking Location | Side Yard / Rear Yard | |
Signage | Division III., Sec. 10-03-08 | |
Landscaping | Division III., Sec. 10-03-06 | |
Parking | Division III., Sec. 10-03-02 | |
Design Standards | Division III., Sec. 10-03-14 | |
Uses | See Master Use Table above | |
(Ord. 20-29, § 2, 9-21-20)
Loading...