1. Plan Size and Legibility.
A. The subdivision plan submitted for final approval shall be clear legible white print of an ink drawing.
B. Final plans shall be on sheet not larger than 34 inches by 44 inches overall. It is recommended that as far as practicable, final plan sheets beheld to the following overall sizes:
17 inches by 22 inches.
22 inches by 34 inches.
34 inches by 44 inches.
Where necessary to avoid sheets larger than the maximum size prescribed above, final plans shall be drawn in two or more sections accompanied by a key diagram showing relative location of the sections.
2. Plan Scale and Required Information.
A. The final plan shall be at a scale of not more than 100 feet to the inch and shall include the following information:
(1) Subdivision name or identifying title.
(2) North point, scale and date.
(3) Name of the record owner and subdivider.
(4) Name and seal of the registered professional engineer or surveyor responsible for the plan.
(5) Boundaries of the tract.
(6) A location map for the purpose of locating the site to be subdivided, showing the relation of the tract to adjoining property and to all streets, roads and municipal boundaries existing within 1,000 feet of any part of the property proposed be subdivided.
(7) Street lines, lot lines, rights-of-way, easements, and areas dedicated or proposed to be dedicated to public use.
(8) Sufficient data to determine readily the location, bearing and length of every street, lot, and boundary line and to reproduce such lines on the ground.
(9) The length of all straight lines, radii, lengths of curves and tangent bearings for each street.
(10) All dimensions and angles or bearings of the lines of each lot and of each area proposed to be dedicated to public use.
(11) The proposed building setback line for each street, or the proposed placement of each building.
(12) Location, size and invert elevation of all existing and proposed sanitary, storm and combined sewers and location of all manholes, inlets and culverts.
(13) All dimensions shall be shown in feet and in hundredths of a foot.
(14) Lot numbers.
(15) Names of streets within and adjacent to the subdivisions.
(16) Permanent reference monuments shall be shown, and shall be as specified by the Borough Engineer. [Ord. 350]
(17) Wherever practicable, names of any adjoining subdivision shall be shown.
(18) Wherever practicable, names of the owners of any unplotted land shall be shown.
(19) Certificate of dedication of streets and other pubic property.
(20) Certificate for approval by the Commission.
B. The final plan shall include thereon or be accompanied by:
(1) An affidavit that the applicant is the owner or equitable owner of the land proposed to be subdivided.
(2) A statement duly acknowledged before an officer authorized to take acknowledgment of deeds and signed by the owner or owners of the property, to the effect that the subdivision as shown on the final plan is made with his or their free consent and that it is desired to record the same.
(3) Certification by the Pennsylvania Department of Environmental
Resources
Protection when individual sewage disposal or water systems are to be installed as required by Part 3 of this Chapter. [A.O.]
(4) Certification by the Borough Engineer that the subdivider has met the requirements of 5301 of this Chapter. [Ord. 350]
(5) Typical cross-sections, street profiles and drainage details for all streets. Such profiles shall show at least the following:
(a) Existing (natural) grade along the proposed street center line.
(b) Existing (natural) grade along each side of the proposed street right-of-way.
(c) Proposed finished centerline grade or proposed finished grate at top of curbs.
(d) Sanitary sewer mains and manholes.
(e) Storm sewer mains, inlets, manholes and culverts.
(6) Protective covenants, if any, in form for recording.
(Ord. 164, 8/20/1965, § 4.200; as amended by Ord. 350, 5/6/1991, §3; and by A.O.)