§18-411.   Requirements for Holding Tanks.
   1.   Any holding tank installed or maintained pursuant to a permit issued under this Part shall comply, in all respects, to the specifications set forth in regulations of the Department, 25 Pa.Code, Chapter 73, inclusive.
   2.   The landowner shall cause the holding tank and all lines, pipes or conduits to the same to be maintained in a good watertight condition at all times.
   3.   All holding tanks shall be installed on a firm and stable soil or subsoil; and in such manner as to prevent settlement or movement.
   4.   No holding tank or lines to the holding tank shall be covered until the Borough’s Enforcement Officer shall have first inspected and approved the installation and authorized covering the same. The landowner shall be responsible for furnishing the Officer reasonable notice of the installation.
   5.   The landowner shall cause a holding tank to be cleaned as frequently as may be required to maintain the contents at a level less than 75 percent of the tank capacity.
   6.   Holding tanks shall be installed at least 50 feet downgrade from any source of water supply.
(Ord. 341, 9/4/1990, §11)