§18-313.   Requirements for Privy.
   1.   Any privy installed or maintained pursuant to a permit issued under this Part shall comply, in all respects, to the specifications set forth in regulations of the Department, 25 Pa.Code, Chapter 73, inclusive.
   2.   The landowner shall cause the privy to be maintained in a good watertight condition at all times.
   3.   All privies shall be installed on a firm and stable soil or subsoil; and in such manner as to prevent settlement or movement.
   4.   No privy vaults or lines to the privy shall be covered until the Borough’s Enforcement Officer shall have first inspected and approved the installation and authorized covering the same. The landowner shall be responsible for furnishing the Officer reasonable notice of the installation.
   5.   The landowner shall cause a privy to be cleaned as frequently as may be required to maintain the contents at a level less than 75 percent of the tank capacity.
   6. Privies shall be installed at least  50 feet downgrade from any source of water supply.
(Ord. 340, 9/4/1990, §13)