(A) Contents. The final plat shall incorporate all changes or modifications required by the Town Council. All drawings or signatures shall be on permanent reproducible form acceptable to the town, with outer dimensions of 24 inches by 36 inches. It shall contain all of the information required for the preliminary plat (except contour lines, public utilities, and the owners of adjacent undeveloped property), plus the following:
(1) Accurate dimensions for all lines, angles, and curbs used to describe boundary streets, alleys, easements, areas to be dedicated for the public use, and other important features;
(2) An identification of all lots and blocks, and names of streets;
(3) A certificate signed and acknowledged by all parties having any recorded title in the land shall appear on the final plat and shall be in conformance with state law;
(4) A certification by a state licensed surveyor as to the accuracy of the survey and drafting of the plat;
(5) Certification for approval of the plat by the Mayor and approval and acceptance of the plat by the Town Council;
(6) Certificate for recording the book, page, date, and instrument number where the plat is recorded in the office of the County Clerk and ex officio register of deeds;
(7) Legal description of the tract being subdivided and reflecting the boundary survey and including the section, township, and range; and
(8) All exterior plat boundary lines with lengths of courses and bearings as determined by an accurate survey in the field. The plat shall be prepared at a scale of not smaller than one inch equals 100 feet.
(B) Accompanying documents. The final plat shall be accompanied by the engineering drawings, construction plans, agreements, or bonds as may be specified by the Town Council in accordance with the provisions of Chs. 1, 3, and 6 of this title.
(Prior Code, § 12-4-1)