SEC. 16-452. USES PERMITTED.

   This division does not allow any uses other than those uses permitted or conditionally permitted in the zone.

(`64 Code, Sec. 36-7.13.3) (Ord. No. 2132)

SEC. 16-453. DEVELOPMENT STANDARDS.

   Any project developed pursuant to this division shall comply with the following regulations and any permit issued for such a project shall incorporate the following regulations as conditions of approval:

   (A)   Maximum dwelling unit density -

      (1)   The dwelling unit density shall not exceed the number of units determined by dividing the total net area of the project by the minimum lot area requirements of the respective zone.

      (2)   Fractions shall be disregarded in determining the permitted numbers of units.

   (B)   Minimum area and dimensions of lots - The area, width, and depth of individually owned parcels of land within the project shall be established by site plan approval. The commission shall consider the following circumstances before approving the project:

      (1)   Topography of the land;

      (2)   The ground area covered by dwellings and accessory structures;

      (3)   Location of common space and its relationship to the dwellings to be served; and

      (4)   Aesthetic relationships between individual dwellings and open spaces.

(`64 Code, Sec. 36-7.13.4) (Ord. No. 2132)

SEC. 16-454. YARDS AND SETBACKS.

   Front, side and rear yards and setbacks shall be established by site plan approval. Building and roof lines shall be indicated on the site plan map.

(`64 Code, Sec. 36-7.13.5) (Ord. No. 2132)

SEC. 16-455. DISTANCE BETWEEN BUILDINGS.

   The distance between any two buildings within the project shall be established as a condition of approval, but shall not be less than the height of the taller of the two buildings.

(`64 Code, Sec. 36-7.13.6) (Ord. No. 2132)

SEC. 16-456. MAXIMUM BUILDING HEIGHT.

   The maximum building height permitted in the respective zone shall apply.

(`64 Code, Sec. 36-7.13.7) (Ord. No. 2132)