SEC. 16-275. MINIMUM LOT AREA.

   (A)   Lots shall have a minimum area of 6,000 square feet in all zones except the R-P-D, C-P-D, M-P-D. Lots in the R-B-1 zone shall have a minimum area of 4,000 square feet.

   (B)   The minimum width of lots shall be 50 feet except in the R-B-1 zone, in which the minimum width of lots shall be 40 feet.

   (C)   No lot shall be divided by a city boundary line. The side lines of lots shall be approximately at right angles to the street line on straight streets or to the tangent on curved streets.

(`64 Code, Sec. 34-111.6) (Ord. No. 617, 948)

SEC. 16-276. MODIFICATION OF SPECIAL USE PERMIT FOR PLANNED DEVELOPMENT.

   Modifications to an approved special use permit for a planned development shall be made as set out in article VII, division 4 of this code.

SEC. 16-277. SUBSEQUENT ZONE CHANGES.

   (A)   A rezoning of property subject to a special use permit for a planned development shall be cause for review of the special use.

   (B)   Repeal of a planned development additive zone terminates the special use permit for the planned development.

(`64 Code, Sec. 34-110.4) (Ord. No. 916, 1409)

SEC. 16-278. TIME LIMIT FOR COMMENCEMENT OF IMPROVEMENTS.

   Improvements authorized by a special use permit for a planned development must be substantially undertaken within 18 months unless some other period is specified by the commission, or the permit shall expire.

(`64 Code, Sec. 34-111) (Ord. No. 916, 1409)

DIVISION 18. LOT SIZE ADDITIVE

SEC. 16-285. PURPOSE.

   The purpose of this division is to provide a zoning additive which can be combined with various other zone designations. The additive will create necessary lot area, setbacks, or density controls which are not provided for in the basic underlying zone.

(`64 Code, Sec. 34-111.01) (Ord. No. 1793)

SEC. 16-286. LOT SIZE ADDITIVE; DEFINITIONS.

   (A)   Basic underlying zone - The basic underlying zone is any of the zones specified in section 16-15 of this chapter to which a lot size suffix is added pursuant to this division.

   (B)   Combined minimum side yard setback - The combined minimum side yard setback is the total footage derived from adding both of the side yard setbacks for a single lot.

   (C)   Minimum single side yard setback - The minimum side yard setback is the minimum amount of space permitted between the main building and the closest side property line. Regardless of the combined minimum side yard setback imposed pursuant to a suffix, the minimum single side yard setback shall be observed for all side yards.

(`64 Code, Sec. 34-111.04) (Ord. No. 1793)